Table of Contents
Advertisement
Measurement Operation
Preparation
z Dial the
z Replace the battery as soon as the battery indicator
appears on the display.
z
Non-Contact Voltage Detector
WARNING: Risk of Electrocution. Before use, always test the
1.
Rotate the Function switch to any measurement position.
2.
Place the detector probe tip on the conductor to be tested.
NOTE: The conductors in electrical cord sets are often twisted.
For best results, move the probe tip along a length of the
cord to assure placing the tip close to the live conductor.
NOTE: The detector is designed with
high sensitivity. Static
electricity or other sources of
energy may randomly trip the
sensor. This is normal
operation.
Rotary
to any active measure range
Voltage Detector on a known live circuit to verify
proper operation.
15
Advertisement
Table of Contents
