Paging; Call Forward Override (Dss Override); Night Transfer Button - Toshiba DP5000 Series User Manual

Paging

You can make an announcement page to a group of telephone speakers selected in
system programming with
on either the DSS console or the ADM can be used for page announcements. See
Call Page" on page

Call Forward Override (DSS Override)

Either the DSS buttons on your DSS console or the associated telephone can be set in
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console's telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
To override call forward with the console's associated telephone
Cnf/Trn
1. Press
2. Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your
station has a typical program setting.
To override call forward with your DSS Console
Press the station DSS button set for Call Forward.

Night Transfer Button

This button enables a pre-programmed station to place the system into Day, Day2 or
Night Mode. See your System Administrator for information on the settings for Day,
Day2 or Night Mode. These modes will transfer calls to a designated location or voice
mailbox, depending on programming.
Night Transfer
1. Press
2. Press the desired Mode number:
• Press
• Press
• Press
Strata CIX DP5000-series Telephone UG
All Call Page
58.
or extension button.
.
1
for Day Mode (LED remains off).
2
for Day2 Mode (LED flashes red).
3
for Night Mode (LED is solid red).
11/07
on the DSS console.
ADM/DSS Console
DSS Console
SD
(if programmed)
"All
75