Pl 91.25 Marking Unit Lower Carriage Assembly - Xerox ColorQube 9303 Service Manual

PL 91.25 Marking Unit Lower Carriage
Assembly
Item Part Description
1 041K06780 Lower carriage assembly (REP
91.14)
2 – Printhead (Type A) (Not spared)
(see NOTE 1) (REP 91.29)
– 604K83791 Printhead (Type B) (see NOTE 1 &
2) (REP 91.29)
– 604K95450 Printhead (Type B - 9301 only)
(USSG/XCL) (see NOTES 1 & 2)
3 – Printhead PWB (P/O PL 91.25 Item
2)
4 127K62310 Printhead stitch adjust motor 1
(MOT91-029)/Printhead roll adjust
motor 1 (MOT91-024)/Printhead
roll adjust motor 3 (MOT91-027)
(REP 91.13)
5 127K62300 X-axis drive motor lower (MOT91-
034) (NOTE 4)
6 – Printhead drive motor bracket (P/O
PL 91.25 Item 5)
7 – Gasket (P/O PL 31.13 Item 9)
8 – Mounting bracket (Not spared)
9 – Purge line filter (P/O PL 91.25 Item
17)
10 – Umbilical (P/O PL 91.25 Item 20)
(NOTE 3) (REP 91.31)
11 – Purge line (P/O PL 91.25 Item 17)
12 117E35660 Lower carriage harness (PJ303,
PJ701)
13 – Lower carriage frame assembly (P/
O PL 91.25 Item 1)
14 – Purge line filter cap (P/O PL 91.25
Item 17)
15 – SFWA lower frame (P/O PL 91.25
Item 1)
16 – Cable clip (Type A) (P/O PL 31.11
Item 29, PL 31.11 Item 13) (see
NOTE)
17 604K54961 Purge line filter assembly
18 – Reservoir gasket (P/O PL 91.25
Item 20)
19 – Check valve unit (P/O PL 91.25
Item 20)
20 – Umbilical kit (REF: PL 31.10 Item
14)
21 826E66291 Lead screw (REP 91.37)
22 – Spring clip (P/O PL 91.25 Item 1)
23 – Plastic plate
NOTE: 1.To identify the type of printhead, refer to GP 46.
NOTE: 2. Refer to GP 50 for ColorQube 9301 low cost
printhead.
NOTE: 3. When replacing the umbilical it is recommended
that the printhead gaskets are replaced on printheads that
are over 12 months old with PL 31.13 Item 9.
Parts Lists
PL 91.25
November 2015
5-102 Xerox® ColorQube® 9303 Family