Pl 12.110 Hvf Ejector, Pressing And Support (1 Of 3) - Xerox ColorQube 9303 Service Manual

PL 12.110 HVF Ejector, Pressing and
Support (1 of 3)
Item Part Description
1 – Front tamper bracket (Not spared)
2 – Ejector assembly (P/O PL 31.13
Item 5) (REP 12.6-171)
3 – Rear tamper support bracket (P/O
PL 12.110 Item 29)
4 – Front pressing plate finger (P/O PL
12.110 Item 28) (REP 12.7-171)
5 – Rear pressing plate finger (P/O PL
12.110 Item 28) (REP 12.7-171)
6 049K23160 Pressing plate bracket
7 003K20653 Front support finger (W/TAG V-009)
(NOTE) (REP 12.8-171)
8 003K20663 Rear support finger (W/TAG V-009)
(NOTE) (REP 12.8-171)
9 – Pressing and support motor
(MOT12-323) (P/O PL 12.110 Item
18)
10 – Offset rod (Not spared)
11 019K13380 Offset rod KL clip
12 – Rear tamper bracket (P/O PL
12.110 Item 29)
13 – Front tamper (Not spared) (REP
12.11-171)
14 – Rear tamper drive belt (P/O PL
12.110 Item 29)
15 130E12830 Pressing and support encoder
sensor (Q12-093)/Rear tamper
away sensor (Q12-183)/Rear
tamper home sensor (Q12-181)
16 – Ejector assembly safety cover (P/O
PL 31.11 Item 10)
17 130K75900 Paper pressing sensor (Q12-322)
18 127K56551 Motor encoder assembly
19 – Rear tamper motor (MOT12-227)
(P/O PL 12.110 Item 29) (REP
12.15-171)
20 – Rear tamper (P/O PL 12.110 Item
29)
21 – Ejector paper present sensor (Q12-
202) (P/O PL 12.110 Item 2)
22 033K04850 Ejector paddle assembly (W/TAG
V-004) (REP 12.100-171)
23 032E35301 Rear tamper arm
24 – Rear tamper pulley (P/O PL 12.110
Item 29)
25 130E12810 Pressing and support sensor A
(Q12-172), B (Q12-171), C (Q12-
173)
26 868E36871 Front tamper arm
27 032E35341 Set of front and rear tamper arms
28 003K21101 Pressing plate kit
29 032K09682 Rear tamper assembly (REP 12.15-
171)
NOTE: If both front and rear support finger assemblies are
needed, then order PL 31.13 Item 4.
Parts Lists
PL 12.110
November 2015
5-34 Xerox® ColorQube® 9303 Family