Kickback Safety Precautions - Gardenline PCH25 User Manual

General Information & Safety Instructions
• Ensure you use oil-mix fuel. Ensure that you mix 25 parts unleaded fuel to 1 part
2-stroke oil. If not, the engine will overheat and cause damage to your chainsaw.
• Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do
not smoke when filling fuel tank.

Kickback safety precautions

• Kickback may occur when the tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain.
• If the bar tip or point contacts, it can produce a rapid reverse reaction, kicking the
guide bar up and back towards the operator. This is known as rotational kickback.
• Pinching the saw chain along the top of the guide bar may push the guide bar
rapidly back towards the operator. This is known as pinch kickback.
• Either of these reactions can cause loss of control of the saw, resulting in serious
personal injury.
• Do not rely exclusively on the safety devices built into your saw. Take the
following steps to help avoid accident or injury:
• Reduce the element of surprise by understanding what causes kickback.
• Keep a firm grip on the chainsaw using both hands, the right hand on the rear
handle and the left hand on the front handle when the motor is running. A firm
grip will help maintain control. Do not let go whilst the motor is running.
• Make sure that the area of operation is free of obstructions. Do not let the point
of the guide bar contact a log, branch or any other object.
• Use high speeds when cutting.
• Do not overreach or cut above shoulder height.
• Carefully follow the sharpening and maintenance instructions given in this
manual.
• Use only replacement bars and chains specified by the manufacturer.
AFTER SALES SUPPORT
1800 909 909 www.powertoolsupport.com
A U S
10
email: help@globalpowerbrands.com
2
46460