N-20P: Setting Clock - Nellcor N-20 Operator's Manual

Set-up
N-20P: Setting Clock
The N-20P has a 24-hour, real-time clock.
1. With the N-20P on, press the D& button. The OXYGEN
SATURATION display shows a "t" (time) followed by a
flashing display of the hour. Press —> to change the hour
(Figure 4).
2. Press 11^. Press —> to change the minutes in the PULSE
RATE display.
3. Press D&. Press -» to change the month in the OXYGEN
SATURATION display.
4. Press D&. Press -» to change the date in the PULSE
RATE display.
5. Press fl&. Press -» to change the year in the OXYGEN
SATURATION display. Then press II& to exit.
Figure 4: Button Location for Setting Clock
12
Sag/
sap/
Ssj|ji>