Subscribe to Our Youtube Channel
Related Manuals for Euroheat Harmony 35
Summary of Contents for Euroheat Harmony 35
- Page 1 Installation & Servicing Instructions Harmony 35 Harmony 45 Balanced Flue Gas Stoves IN1156 Edition E March 2012 PART NUMBER SERIAL NUMBER...
-
Page 2: Table Of Contents
Information from the Euroheat Technical Team Euroheat and Nestor Martin have a policy of continual research and development and reserve the right to modify its appliances without prior notice. We make every effort to ensure that the information provided in this document is correct and accurate at the time of printing. -
Page 3: Safety Precautions
In your own interest, and those of safety, and in accordance with the Gas Safety (Installation and Use) Regulations, Euroheat stoves must be installed by a suitably qualified Gas Safe technician using the appropriate fittings for the gas type being used, and the stove must not be modified in anyway. -
Page 4: Technical Data With Mertik Maxitrol Gv34 Gas Valve
Technical Data for Harmony 35 (H35) with Mertik Maxitrol GV34 Gas Valve. Model Number H35001 Cast Black, H35002 Bottle Green Enamel, H35003 Satin Black Enamel Standard supply appliance is configured for Natural Gas; for LPG specify at time of order... - Page 5 87% Nat. Gas and 87% LPG. The test data from which it has been calculated has been certified by BELTEST. The efficiency value may be used in the Governments Standard Assessment Procedure (SAP) for energy rating of dwellings. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E...
-
Page 6: Accessories Supplied With Stove
Grub Screw position, but should be removed unless required to help level the stove. Plastic Hearth Protector E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012... - Page 7 1. Installation It MUST be returned to Euroheat for the registration to be completed. The stove should be installed by a competent qualified heating engineer, who will be conversant with the Building Regulations and Codes of Practice current at the time of installation. Installation instructions are supplied with the stove which contain instructions specific to the appliance.
- Page 8 Curtains and furnishings should be a minimum of 1m from the stove. E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 9: Appliance Location
Care should be taken to ensure that pipe work brought through metal structures has been secured to prevent chaffing, but allow for thermal expansion. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... -
Page 10: Flue Spigot Fitting 1
1) Remove the inner adapter pipe, see above, and choke plate from the top of the stove. The choke plate is not required for the rear flue option. Choke plate E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012... - Page 11 Do not fit the choke plate to the rear outlet as it will restrict the air flow and stall the flue gasses and the stove will not work. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E...
- Page 12 7) Fit the gasket and rear blanking plate onto the top flue exit using the countersunkscrews. If it has an enamel finish the cup washers should also be used to protect the enamel finish. Cup washer for enamelled finished stoves E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 13: Installation Of The Flue System
Installation of the Flue System All the information regarding the three types of flue kits can be found in the Euroheat’s Balanced Flue Technical Guide, Document No: IN1105. Top to Horizontal High-level Top to Vertical High-level Flue Kit: MS91103 Flue Kit: MS91101... -
Page 14: Installation Of The Gas Log Effect
Back log Ceramic burner Left log 1 gram bag ember glow fibres Ember cubes EMBERGLOW Platinum Bright Embers Front log Burner and Log Assembly Complete E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012... -
Page 15: Placement Of The Ember Glow Fibres
Do not cover pilot ignition route holes with either ember cubes or ember fibres. Place fibres and cubes to the side of this area. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... - Page 16 Gently rub the ember glow into the burnt surfaces of the log. Left log fits into groove in burner surface E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
- Page 17 Place ceramic ember cubes along the holes of the burner in front of and to the sides of the right hand log, with teased out sections of ember glow under each ember cube, leaving about 5mm between each cube. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE...
- Page 18 The ceramic log effect burner sits lightly on top of the gas input venturi tube, do not push the burner hard down onto it as this may crack the ceramic log effect burner. E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 19: Gas Connection
Once the pilot has been established, let out the control knob and turn it anticlockwise to the “ON” position. Main Burner Control Turn the larger left hand control anti clockwise to increase, clockwise to decrease the desired heat output. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... - Page 20 Operating pressure adjustment screw (The direction is indicated on the brass cover of the adjustment screw) E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 21: Gas Pressure Test Nipple Locations
Access to the test nipples can be obtained from below the valve, see picture below. Micro switch on models where the remote control option has been fitted. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... -
Page 22: Fitting The Remote Control
Ensure that the receiver will accept instructions from the handset. They must match each others coding and the instructions for this are in the operating instructions. Operating Instructions These are supplied with the remote control kit. E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012... - Page 23 The appliance is factory tested, but it is possible for a connection to have been disturbed during transportation and installation re check all gas connections are tight. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E...
-
Page 24: Information For Users Which Must Be Advised By The Installer Verbally Or In Writing
It must be serviced on a regular basis, i.e. every 12 months. Servicing and spare parts can be obtained by contacting the stockist from which the stove was purchased or from the Euroheat web site. www.euroheat.co.uk or directly from Euroheat on 0044 01885 491126. -
Page 25: Changing Gas Operating Type
Fit the label denoting gas type to the data plate. (If converting from LPG to Natural gas remove the label from the data plate exposing the original data.) Air Collar Natural Gas Air Collar Natural LPG Maximum Maximum Maximum © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... -
Page 26: Servicing Instructions
Confirm appliance is left in a safe operational condition. Use only genuine replacement parts, non standard components could invalidate the warranty and may be dangerous. E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012... -
Page 27: Burner Removal And Replacement
1 to 2mm movement, see page 27. H45 Burner Bracket, Threaded Rod and Wing Nut © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... - Page 28 Replace the log effect Follow the instructions on pages 12 to 17. E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 29: Thermocouple Replacement
4) Remove the metal shroud from the pilot assembly to allow access to the rear burner tray securing bolt. See picture. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012 E & OE Instructions Part number IN1156 Ed. E... - Page 30 10mm thermocouple. Retaining nut Igniter 9) Remove the thermocouple from the rear of the gas valve. electrode E & OE Instructions Part number IN1156 Ed. E © EUROHEAT DISTRIBUTORS (H.B.S) LTD. March 2012...
-
Page 31: Door Handle Adjustment
Fitting the Replacement Euroheat Universal Thermocouple (MS2017) 1) Loosely fit the 10mm nut to the pilot assembly and push the thermocouple sensor through the nut to the correct position and tighten to hold it in position. Correct position of thermocouple... - Page 32 10,000 pages of technical information, spare parts, product shots, news and 1001 other things, - you will not find a more comprehensive solution to your queries, whatever time of the day. www.euroheat.co.uk Court Farm Business Park, Bishops Frome, Worcestershire WR6 5AY Pre sales:...
Need help?
Do you have a question about the Harmony 35 and is the answer not in the manual?
Questions and answers