Mounting Instructions - Pacific WDV-18 Parts & Operating Manual

ITEM PART NO. DESCRIPTION
1 960008 Bolt, Shoulder
2 609703 Wheel
3 608506 Squeegee Channel Weldment
4 920019 Nut, 1/4-20 Hex Jam
5 962010 Screw, 1/4-20x1 HHCS
6 A13018 Knob
7 W506D Screw,5/16-18x3/4 HH MS
8 W380D Screw, 10-32x3/4 PHP
9 607209 Retainer-Squeegee Blade
10 600705 Blade, 28" Squeegee
11 600301 Arm Weldment-Squeegee
12 980006 Washer, 5/16 Lock
13 920001 Nut, 10-32 Elastic Stop
14 980007 Washer, 5/16 Flat
1. Position the machine on a level surface.
2. Unlock the lower squeegee lift arm weldment (11).
3. Align the squeegee with the lift arm weldment; using the shoulder screws (5) on the back side of the lift arm
weldment, place the jam nuts (4) between the arm weldment and squeegee and then screw the knobs (6) on
the front of the squeegee assembly. Leave the hardware slightly loose.
4. Position the squeegee assembly to assure that it sits flat from side to side level with the surface. Then tighten
the knobs.
5. Connect the vacuum hose assembly, Items 17, 18 and 19 to the tank adaptor and squeegee adaptor.
6. Adjust the squeegee height by rotating the screw (27) clockwise to lower the squeegee and counterclockwise
to raise the squeegee.
QTY.
2
2
1
3
2
2
6
16
2
2
1
6
2
6

MOUNTING INSTRUCTIONS

9
ITEM PART NO. DESCRIPTION
15 960007 Bolt, Shoulder, 3/8x1/2 Lg
16 600806 Bracket, Arm Support
17 600205 Adaptor, Hose
18 604106 Hose, Vacuum
19 600206 Adaptor, Hose
20 920012 Nut, 5/16-18 ESNA Lock
21 962015 Screw, 10-32x3/8 Pan Hd
22 608507 Support, Lock Backup
23 605102 Lock, Squeegee Spring
24 608201 Spacer, Squeegee Support
25 608512 Stop, Squeegee Arm
26 W168D Screw, Set
27 962010 Screw, 1/4-20x1 HHCS
QTY.
2
2
1
1
1
4
2
1
1
2
1
1
1