Table of Contents
Advertisement
Quick Links
WET/DRY VACUUMS
PV-12
PV-18
PV-18S
PV-18D
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For new books write to:
Pacific
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
Gulper 12P
Gulper 18P
Gulper 18PS
Gulper 18PD
OPERATING & MAINTENANCE
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Pacific re-
serves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING INFORMATION:
INSTRUCTIONS
MODEL _______________________________
SERIAL NUMBER _______________________
PART NUMBER _________________________
DATE PURCHASED ______________________
Advertisement
Table of Contents
Related Manuals for Pacific PV-12
Summary of Contents for Pacific PV-12
- Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Pacific re- and safe operation of this machine. Read this book care- serves the right to make changes or improvements to its fully before starting the machine.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS MACHINE! WARNING! To reduce the risk of fire, electric shock, or injury: 1. You must be trained to operate this machine. This machine is to be operated for its intended use only. -
Page 3: Operating Procedures
Check for a good seal around the outer filter lip and tank rim. Tool Kit #608809 is included with the Models PV-12/12P, 5. Replace the head assembly and fasten the clamp. At- PV-18/18P and PV-18D/18PD. See Page 5 for the kit’s illus- tach the hose, wand and floor tool of choice (reference tration and assembly instructions. -
Page 4: Maintenance
MAINTENANCE Good maintenance procedures assure better operation, ELECTRICAL CABLE: fewer repairs and longer life to your machine. Check the cord for any nicks, cuts or damage. Report these to your supervisor for correction. DISCONNECT THE ELECTRICAL PLUG OF THE MACHINE FROM THE ELECTRICAL OUTLET VACUUM HEAD ASSEMBLY: BEFORE DOING ANY CLEANUP, REPAIRS OR 1. -
Page 5: Tool Kit
TOOL KIT PART #608809 7 - 16” Bristle Floor Tool Accessory Not included with machine. ITEM PART NO. DESCRIPTION QTY. 600206 Adaptor, 1-1/2 Hose, Vac End TOOL KIT ASSEMBLY: Hose, 1-1/2x10ft. 604108 (w/out adaptors) 1. Connect the hose to the collector tank by inserting the large, Hose Asm,1-1/2x10ft.( 604114 w/adaptors) - Page 6 PV-12 & PV-18 GULPER 12P & 18P...
- Page 7 602340 Cover, Motor 964022 Screw, Motor Cover Serial Plate 515150 Warning Label 608530 Strain Relief 908010 Power Cord, 16-3x35ft. - PV-12/12P 908034 Power Cord, 16-3x35 ft.- PV-18/18P 964020 Screw, Cap 607210 Retainer, Cord 964021 Screw, Retainer 600214 Adaptor, Upper Motor...
- Page 8 PV-18S & PV-18D GULPER 18PS & 18PD...
- Page 9 PV-18S & PV-18D GULPER 18PS & 18PD ITEM PART NO. DESCRIPTION QTY. 602370 911089 Switch 602770 Cover, Motor 960030 Screw, Motor Cover Serial Plate 515150 Warning Label 608530 Strain Relief 908012 Power Cord, 16-3x50ft. - PV-18S/18PS 908034 Power Cord, 16-3x35 ft.- PV-18D/18PD W131D Screw, 1/4-20x5 HH W148D...
-
Page 10: Squeegee Assembly
SQUEEGEE ASSEMBLY PART #608521... -
Page 11: Mounting Instructions
11. Proceed with steps 1-4 from the previous section. 12. If using on a PV-12/12P remove the adaptor (17) and cut Squeegee Assembly as an Accessory - for the Models PV- the hose assembly (18&19) to a 16 inch length. The 16 12/Gulper 12P, PV-18/Gulper 18P and PV-18D/Gulper inches includes the adaptor (19). -
Page 12: Warranty Policy
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.