Pacific GULPER 16SV Operating & Maintenance Instructions

16 gallon wet/dry vacuum with front mount squeegee

Advertisement

Quick Links

16 GALLON WET/DRY
FRONT MOUNT SQUEEGEE
INTRODUCTION
This operator's book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Pacific
2259 South Sheridan Road
Muskegon, MI 49442
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a "CONCEALED DAMAGE REPORT" im-
mediately with the delivering carrier.
GULPER 16SV
VACUUM WITH
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest
product information available at the time of publica-
tion. Pacific reserves the right to make changes or
improvements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ____________________

Advertisement

Table of Contents
loading

Summary of Contents for Pacific GULPER 16SV

  • Page 1 Keep this book tion. Pacific reserves the right to make changes or and tell all operators to read the book. If you do not improvements to its machines without notice.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1.
  • Page 3 OPERATING & MAINTENANCE PROCEDURES WARNING! - For the safe operation of this ma- front mount squeegee to increase or decrease the caster chine follow instructions given in this booklet and height which would raise or lower the squeegee height . the training given by your supervisor.
  • Page 4: Maintenance

    MAINTENANCE Good maintenance procedures assure better operation, fewer repairs and longer life for your machine. WARNING! - Always disconnect the machine’s electrical plug from the electrical outlet before doing any clean up, repairs or maintenance of the machine and when leaving the machine unattended. CLEAN THE MACHINE AFTER EACH USE: 1.
  • Page 5 NOTES...
  • Page 6 Gulper 16SV Body Assembly...
  • Page 7: Parts Listing

    PARTS LISTING ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. Screw 602350 Cover, Motor 601550 Cap, Dome See item 52 Ring, Filter 964165 Screw 602010 Clamp, Lid 608511 Strain Relief 603909 Handle, Transport Insert, Motor Intake 964166 Screw 908104 Cord, 14-3 SJTW, 50 Feet Cap, Wheel Shaft...
  • Page 8 Squeegee Assembly Drawing 2...
  • Page 9 PARTS LISTING ITEM PART NO. DESCRIPTION QTY. 600206 Adapter, 1 1/2 Hose, Vac End 604112 Hose, Vacuum w/o Cuffs 600205 Adapter, 1 1/2 Hose 601311 Bar, Clamp 600708 Blade, Rubber 601806 Casting, Squeegee 604117 Hose Assembly, Squeegee 605001 Knob, Lower Adjusting 605002 Knob, Upper Adjusting 924021 Nut, M6 Hex SS Bracket, Squeegee Mount...
  • Page 10 1) The inoperative machine or warranted parts must be delivered to the authorized service center with shipping and delivery charges prepaid. If unable to locate a service center, you may contact Pacific at the address listed herein for the location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.

Table of Contents