16 gallon wet/dry vacuum with front mount squeegee (10 pages)
Summary of Contents for Pacific WAV-30
Page 1
Pacific reserves the right to make changes or improvements without notice. Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better serve you over the lifetime of the product. For quick and easy registration, go to:...
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS IN THIS BOOK BEFORE USING THIS MACHINE! If you do not understand, ask your supervisor. WARNING: To reduce the risk of fire, electric shock, or injury: 1. DO NOT USE THIS VACUUM FOR PICK UP OF WET DEBRIS. 2.
Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug.
OPERATING PROCEDURES WARNING! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! NEVER USE THIS MACHINE TO PICK UP VOLATILE OR EXPLOSIVE MATERIALS! The model shown in this manual is intended for commercial use.
MAINTENANCE WEEKLY: 1. Inspect and clean the two vacuum inlet filters. Remove the cover from the machine. The filters are now accessible (see page 10). They are constructed of foam attached to a plastic mounting ring. Slide the filters off and clean by shaking or vacuuming.
Page 6
WAV-30 WIDE AREA VACUUM - FINAL ASSEMBLY Wand Recess Area on Handle #201202 Bumper #930005 Pop Rivet Handle, Machine #653901 (Image Enlarged) Cover #652302 Kit, Hopper Latch #655001 Body, Machine #651304 Hose #654101 Clamp with Screw #S611A Cuff (2) #242402...
WAV-30 WIDE AREA VACUUM - BRUSH ASSEMBLY BRUSH ASSEMBLY Shoe Brush #657901 Not Shown: Screw, #8x1/2 THP (8) Gasket-Brush Shoe Two (2) Sets: #W136D #653404 Bearing Housing #654201 Pulley, Brush Screw, 8-32x3/8 Flat PH (2) #656901 #962105 Set Screw (2)
Page 10
WAV-30 WIDE AREA VACUUM - VACUUM MOTORS & FILTERS Not Shown: Lead Assembly, Green (2) Gasket, Motor Mount (2) #911212 #633403 Lead Assembly (4) #911228 Screw , Motor Mount (4) #962025 Vacuum Motor (2) #655204 Vacuum Inlet Filters (2) #633301...
Page 12
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.