Specifications; Epta-Procedure - Makita DSS500 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Lever
4-1. Lever
5-1. Base
5-2. Cutting line
6-1. Lock-off lever

SPECIFICATIONS

Max. Cutting depth
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
Noise
The typical A-weighted
according to EN60745:
Model DSS500
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DSS501
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
6-2. Switch trigger
7-1. Shaft lock
8-1. Hex wrench
9-1. Hex bolt
9-2. Outer flange
9-3. Saw blade
9-4. Inner flange
10-1. Hex wrench
11-1. Dust nozzle
Model
Blade diameter
at 90°
at 45°
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 75 dB (A)
pA
) : 76 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,W
2
DSS500
359 mm
2.6 kg
D.C. 14.4 V
ENE028-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
ENG905-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
Makita declares that the following Machine(s):
sum)
Designation of Machine:
Cordless Circular Saw
Model No./ Type: DSS500, DSS501
Conforms to the following European Directives:
2006/42/EC
4
11-2. Screw
12-1. Dust nozzle
12-2. Hose
12-3. Vacuum cleaner
15-1. Adjusting screw for 90
16-1. Triangular rule
17-1. Limit mark
18-1. Brush holder cap
18-2. Screwdriver
DSS501
136 mm
51 mm
35 mm
3,600
364 mm
2.7 kg
D.C. 18 V
ENG901-1
ENH101-17