12
Chain Dialing
After dialing a number you may be requested to enter a special access code, for
example, when performing a banking transaction.
1. Store the access code into one of the memory locations
2. Dial the main number.
3. Press
and the memory location where you stored the access code at
mem
the appropriate time.
Erasing a Stored Number
1. Remove the handset from the base.
2. Press
twice.
mem
3. Press the memory location number
long beep confirming that you have erased the number.
Replacing a Stored Number
Remember your XS620 phone has 10 memory locations, represented by the
numbers
-
on the keypad. If you store a phone number in one of these
0
9
locations, then store a different number in the same location later, the new
number will replace the previous one.
0
-
you want to clear. You hear a
0
9
-
.
9