Installation Guide for the Model SW502 and Model SW507 Ethernet Switches
BNC Connector
The BNC connector for the Model SW502 switch supports 10 Mbps data transmission and connects
the switch to other devices.
1 = center conductor
2 = ground shield
Figure B-3. BNC connector on the Model SW502 switch
BNC T-Connector and 50 Ω Ω Terminator
The BNC port on the Model SW502 switch, together with the BNC T-connector and the 50 Ω
terminator are used for connection to a thin coaxial segment. A thin coaxial Ethernet segment supports
10 Mbps data transmission. For information on connecting through the BNC port, refer to Chapter 3,
"Installation," and Appendix C, "Cabling Specifications."
Figure B-4. BNC connector and terminator
Connector Pin Assignments
B-3