Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Netgear SRK60B03 cerca il tuo prodotto tra le migliori offerte di Router User Manual Orbi Pro Models SRR60 SRS60 NETGEAR, Inc. March 2020 350 E. Plumeria Drive 202-11824-07...
Page 2 See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
Page 3 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Revision History Publication Part Publish Date Comments Number 202-11824-07 March 2020 We added the following sections: • Enable the network access control list and specify the access rule on page 54 and subsections •...
Page 4: Table Of Contents
Sync an add-on Orbi Pro satellite..........19 Add satellites to your network using the router web interface.20 Set up your Orbi network with the NETGEAR Insight app....21 Chapter 2 Connect to the Orbi Pro Network and Access the Router Connect to the network..............23 Wired connection................23...
Page 5 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage an IPv6 Internet connection..........33 Requirements for entering IPv6 addresses.........33 Specify IPv6 Internet connections..........33 Use auto detection for an IPv6 Internet connection....34 Use auto configuration for an IPv6 Internet connection...35 Set up an IPv6 6rd tunnel Internet connection......36 Set up an IPv6 6to4 tunnel Internet connection......38 Set up an IPv6 pass-through Internet connection......40 Set up an IPv6 fixed Internet connection........40...
Page 6 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Disable the DHCP server feature in the router.......74 Manage reserved LAN IP addresses..........75 Reserve an IP address..............75 Edit a reserved IP address............76 Delete a reserved IP address entry..........76 Manage custom static routes............77 Set up a static route...............77 Edit a static route................78 Delete a static route...............79...
Page 7 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Change the admin password............112 Enable admin password reset............113 Reset the admin password..............114 View router status and usage information........114 Display Internet port statistics............115 Check the Internet connection status..........116 View satellites, WiFi devices, and wired devices connected to the Orbi network..................117 View satellite status................118 View and manage logs of router activity........119...
Page 8 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Block VPN client Internet access in the router......146 Use a VPN tunnel to access your Internet service at home..147 Chapter 9 Troubleshooting Quick tips...................149 Sequence to restart your network..........149 WiFi settings.................149 Network settings................149 The router and satellite do not sync..........149 You cannot log in to the router............151...
Page 9: Chapter 1 Overview
• Connect your Orbi Pro router • Place your satellite • Sync your Orbi Pro satellite • Set up your Orbi network with the NETGEAR Insight app For more information about the topics covered in this manual, visit the support website at support.netgear.com.
Page 10: Supported Orbi Pro Models
• Orbi Pro Ceiling Satellite (Model SRC60) For more information about these Orbi Pro satellites, see their user manuals, which are available at https://www.netgear.com/support/. Note: To manage your Orbi Pro router and any Orbi Pro satellites that are connected to your Orbi Pro network, you must manage them from your Orbi Pro router web interface.
Page 11: Orbi Pro Satellite Model Srs60 Hardware Overview
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Internet port 4. Ethernet ports 5. Power On/Off button and Power LED 6. DC Power connector 7.
Page 12: Orbi Pro Wifi System Leds
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Orbi Pro WiFi system LEDs The following table describes the LED behavior for an Orbi Pro router (model SRR60) and Orbi Pro satellite (model SRS60) that are purchased together and come in the same package.
Page 13: Wall Mount Or Ceiling Mount Your Orbi Pro Router
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Table 2. Orbi Pro add-on satellite (model SRS60) LED description LED Behavior Power LED The Power LED is located above the Power On/Off button on the rear panel. • Solid green. Power is on. •...
Page 14: Ceiling-Mount Your Orbi Pro
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To wall mount your router or satellite: 1. Place your Orbi router or satellite on the mount base and attach the router or satellite to the base with the provided screws. 2.
Page 15 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To ceiling mount your router or satellite: 1. Place your Orbi router or satellite on the mount base and attach the router or satellite to the base with the provided screws. 2.
Page 16: Orbi Pro Router Label And Orbi Pro Satellite Label
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 6. Slide the mount base into the ceiling bracket. Orbi Pro router label and Orbi Pro satellite label The Orbi Pro router label shows the login information, the WiFi network name and password, the router’s MAC address, and the router’s serial number.
Page 17: Connect Your Orbi Pro Router
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Figure 4. Orbi Pro satellite label Connect your Orbi Pro router If you want to connect your Orbi Pro router to an existing gateway, we recommend that you turn off your existing gateway’s WiFi. To cable your router: 1.
Page 18: Place Your Satellite
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Place your satellite Your satellites must be within range of your router’s WiFi signal in order for it to sync with the router. Use the satellite’s ring LED to help you determine where to place your satellite.
Page 19: Sync An Add-On Orbi Pro Satellite
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 4. If the satellite ring LED is magenta, move the satellite closer to the router and then sync the satellite to the router: a. Press the Sync button on the back of the router. b.
Page 20: Add Satellites To Your Network Using The Router Web Interface.20
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Add satellites to your network using the router web interface You can use the router web interface to add a satellite to your Orbi network. To add a satellite to your Orbi network using the router web interface: 1.
Page 21: Set Up Your Orbi Network With The Netgear Insight App
You can use the NETGEAR Insight app to set up your Orbi network. To find the app, search for NETGEAR Insight in the Apple App Store or Google Play Store. Then launch the NETGEAR Insight app on your mobile device and follow the prompts.
Page 22 Connect to the Orbi Pro Network and Access the Router To manage your Orbi Pro router and any Orbi Pro satellites that are connected to your Orbi Pro network, you must manage them from your Orbi Pro router web interface. This chapter contains the following sections: •...
Page 23: Connect To The Network
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Connect to the network You can connect to the Orbi network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP).
Page 24: Wifi Connection Using Wps
When you connect to the network (either with WiFi or with an Ethernet cable), you can use a web browser to access the router to view or change its settings. The first time you access the router, the NETGEAR installation assistant automatically checks to see if your router can connect to your Internet service.
Page 25: Use The Automatic Internet Setup Option
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Use the automatic Internet setup option You can set up your router automatically, or you can use a web browser to access the router and set up your router manually. Before you start the setup process, get your ISP information and make sure that the computers and devices in the network use the settings described here.
Page 26: Log In To The Orbi Router Web Interface
Contact your ISP to verify that you are using the correct configuration information. d. Read Troubleshooting on page 148. If problems persist, register your NETGEAR product and contact NETGEAR technical support. Log in to the Orbi router web interface When you log in to the Orbi, the browser displays the router web interface.
Page 27: Change The Language
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Change the language By default, the language is set as Auto. To change the language: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 28: Chapter 3 Specify Your Internet Settings
Specify Your Internet Settings Usually, the quickest way to set up the router to use your Internet connection is to allow Orbi to detect the Internet connection when you first access the router with a web browser. You can also customize or specify your Internet settings. This chapter contains the following sections: •...
Page 29: Use The Internet Setup Wizard
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. To use the Setup Wizard: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 30 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 31: Specify An Internet Connection That Uses A Login
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 12. Click the Test button to test your Internet connection. Specify an Internet connection that uses a login To view or change the basic Internet setup: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 32 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 12. Select an Internet IP Address radio button: • Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. • Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP address that your ISP assigned.
Page 33: Manage An Ipv6 Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage an IPv6 Internet connection The router supports many different types of IPv6 Internet connections for which you can specify the settings manually. Requirements for entering IPv6 addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons.
Page 34: Use Auto Detection For An Ipv6 Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 • Use auto detection for an IPv6 Internet connection on page 34 • Use auto configuration for an IPv6 Internet connection on page 35 • Set up an IPv6 6rd tunnel Internet connection on page 36 •...
Page 35: Use Auto Configuration For An Ipv6 Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s LAN interface.
Page 36: Set Up An Ipv6 6Rd Tunnel Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The router automatically detects the information in the following fields: • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address.
Page 37 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 are assigned for use within the service provider’s network. This mapping allows for automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing stateless operation of 6rd. With a 6rd Tunnel configuration, the router follows the RFC5969 standard, supporting two ways to establish a 6rd tunnel IPv6 WAN connection: •...
Page 38: Set Up An Ipv6 6To4 Tunnel Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 6. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. •...
Page 39 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The IPv6 page displays. 5. From the Internet Connection Type menu, select 6to4 Tunnel. The page adjusts. The router automatically detects the information in the Router’s IPv6 Address on LAN field. This field shows the IPv6 address that is acquired for the router’s LAN interface.
Page 40: Set Up An Ipv6 Pass-Through Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Set up an IPv6 pass-through Internet connection In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
Page 41: Set Up An Ipv6 Dhcp Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 5. From the Internet Connection Type menu, select Fixed. The page adjusts. 6. Configure the fixed IPv6 addresses for the WAN connection: • IPv6 Address/Prefix Length. The IPv6 address and prefix length of the router WAN interface.
Page 42 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 43: Set Up An Ipv6 Pppoe Internet Connection
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 9. Select an IP Address Assignment radio button: • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. •...
Page 44 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s LAN interface.
Page 45: Change The Mtu Size
MTU setting than the other devices, the data packets must be split or “fragmented” to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another. Leave the MTU unchanged unless one of these situations occurs: •...
Page 46 M T U Application 1500 The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches. 1492 Used in PPPoE environments. 1472 Maximum size to use for pinging.
Page 47: Chapter 4 Control Access To The Internet
Control Access to the Internet The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet. This chapter includes the following sections: • Manage MAC access control lists for WiFi networks and the LAN •...
Page 48: Manage Mac Access Control Lists For Wifi Networks And The Lan.48
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage MAC access control lists for WiFi networks and the LAN A MAC access control list (ACL) for a WiFi network (that is, an SSID) or the wired network (that is, the LAN) allows or denies a device access to the network based only on the MAC address of the device.
Page 49: Enable A Mac Acl For A Specific Network
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Enable a MAC ACL for a specific network When you enable a MAC ACL for a specific network, you must specify the default policy for that network. The default policy determines whether devices that you add to the MAC ACL are allowed or denied access to that specific network.
Page 50: Add Automatically Detected Devices To A Mac Acl
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 You can now add and manage devices on the MAC ACL. For more information, see the following sections: • Add automatically detected devices to a MAC ACL on page 50 • Manually add, remove, or change the information for a device on a MAC ACL on page 51 Add automatically detected devices to a MAC ACL After you set up a MAC ACL for a network and specify the default policy for the MAC...
Page 51: Manually Add, Remove, Or Change The Information For A Device On A Mac Acl
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The devices are added to the MAC ACL on the MAC ACL page. Devices on the MAC ACL are an exception to the default policy: • If the default policy of the MAC ACL is to allow access, the added devices are denied access.
Page 52: Disable A Mac Acl For A Specific Network
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 c. In the Manual Access Management pop-up window, click the ADD button. The device is added to the MAC ACL on the MAC ACL page. Devices on the MAC ACL are an exception to the default policy: •...
Page 53: Manage The Orbi Network Access Control List
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 4. Select ADVANCED > Security > MAC ACL. The MAC ACL page displays. 5. Go to the section for the network for which you want to disable the MAC ACL. The first section is for the admin WiFi network, the second for the employee WiFi network, the third for the IoT WiFi network, the fourth for the guest WiFi network, and the fifth for the wired network.
Page 54: Enable The Network Access Control List And Specify The Access Rule
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Note: Each network device owns a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F (uppercase or lowercase) only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of a device.
Page 55: Manage The Allowed Devices On The Network Access Control List
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. Select an access rule for new devices: • Allow all new devices to connect. With this setting, if you add a new device, it can access the Orbi network. You do not need to enter its MAC address on this page.
Page 56 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 4. Select ADVANCED > Security > Access Control. The Access Control page displays. 5. Click the View list of allowed devices not currently connected to the network link. A table displays the detected device name, MAC address, and connection type of the devices that are not connected but allowed to access the Orbi network.
Page 57: Manage The Blocked Devices On The Network Access Control List
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage the blocked devices on the network access control list If you set up an access list that allows all new devices to access the Orbi network but you want to block some devices from accessing the Orbi network, you must specify the devices that you want to block.
Page 58: Use Keywords To Block Internet Sites
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 8. To change the information for a device on the blocked list, do the following: a. Select the check box for the device. b. Click the EDIT button. The Edit Blocked Device page displays. c.
Page 59: Delete Keywords That Are Used To Block Internet Sites
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 6. In the Type keyword or domain name here field, enter a keyword or domain that you want to block. For example: • Specify XXX to block http://www.badstuff.com/xxx.html. • Specify .com if you want to allow only sites with domain suffixes such as .edu or .gov.
Page 60: Avoid Blocking On A Trusted Computer
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 6. Click the Apply button. Your settings are saved. Avoid blocking on a trusted computer You can exempt one trusted computer from blocking. The computer that you exempt must be assigned a fixed IP address. You can use the reserved IP address feature to specify the IP address.
Page 61 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 62: Schedule When To Block Internet Sites And Services
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 10. Click the Add button. Your settings are saved. Schedule when to block Internet sites and services When you schedule blocking, the same schedule is used to block sites and to block services.
Page 63: Set Up Security Event Email Notifications
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Set up security event email notifications The router can email you its logs of router activity. The log records router activity and security events such as attempts to access blocked sites or services. To set up email notifications: 1.
Page 64 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Email alerts are sent immediately when someone attempts to visit a blocked site. 11. To send logs based on a schedule, specify these settings: • From Send logs according to this schedule menu, select the schedule type. •...
Page 65: Chapter 5 Specify Network Settings
Specify Network Settings This chapter includes the following sections: • View or change WAN settings • Manage Dynamic DNS • Set up a default DMZ server • Change the router’s device name • Change the LAN TCP/IP settings • Use the router as a DHCP server •...
Page 66: View Or Change Wan Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 View or change WAN settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port.
Page 67: Manage Dynamic Dns
DNS service does not work because private addresses are not routed on the Internet. Set up a new Dynamic DNS account To set up Dynamic DNS and register for a free NETGEAR account: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 68: Specify A Dns Account That You Already Created
A message displays the Dynamic DNS status. Specify a DNS account that you already created If you already own a Dynamic DNS account with NETGEAR, no-IP, or Dyn, you can set up the router to use your account. To set up Dynamic DNS if you already created an account: 1.
Page 69: Change The Dynamic Dns Settings
9. For a no-IP Dyn account, in the User Name field, enter the user name for your account. 10. For a NETGEAR account at no-IP, in the Email field, type the email address for your account. 11. In the Password (6-32 characters) field, type the password for your DDNS account.
Page 70: Change The Router's Device Name
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 correctly with them, but other applications might not function well. In some cases, one local computer can run the application correctly if the IP address for that computer is entered as the default DMZ server. DMZ servers pose a security risk.
Page 71: Change The Lan Tcp/Ip Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To change the router’s device name: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 72 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Page 73: Use The Router As A Dhcp Server
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Use the router as a DHCP server By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN.
Page 74: Disable The Dhcp Server Feature In The Router
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you defined • Subnet mask • Gateway IP address (the router’s LAN IP address) •...
Page 75: Manage Reserved Lan Ip Addresses
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage reserved LAN IP addresses When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router’s DHCP server. Assign reserved IP addresses to computers or servers that require permanent IP settings.
Page 76: Edit A Reserved Ip Address
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Edit a reserved IP address To edit a reserved address entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 77: Manage Custom Static Routes
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 5. Select the radio button next to the reserved address. 6. Click the Delete button. The address is removed. Manage custom static routes Typically, you do not need to add static routes unless you use multiple routers or multiple IP subnets on your network.
Page 78: Edit A Static Route
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 79: Delete A Static Route
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 80: Change The Admin Wifi Network Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Change the admin WiFi network settings You can set up four WiFi networks for your Orbi Pro network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access.
Page 81: Change The Admin Wifi Password Or Security Level
When you use multiple routers, satellites, or extenders in your network (access points), you experience less interference if adjacent access points use different. The recommended channel spacing NETGEAR recommends a minimum of four channels between adjacent access points (for example, use channels 1 and 5, or 6 and 10).
Page 82 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 83: Manage The Employee Wifi Network Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 When you select this option, additional fields display so that you can specify the RADIUS server. Do the following: a. In the IP address field, enter the IP address of the RADIUS server to which the router must connect.
Page 84 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To enable the employee WiFi network and change the WiFi settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 85: Change The Employee Wifi Password Or Security Level
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 11. Make sure that a user can connect to the WiFi network with its new settings. If you cannot connect using WiFi, check the following: • Is your WiFi-enabled computer or mobile device connected to another WiFi network in your area? Some WiFi devices automatically connect to the first open network without WiFi security that they discover.
Page 86 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 When you select this option, the Password (Network Key) field displays. Do the following: a. In the Password (Network Key) field, enter the network key (password) that you want to use. It is a text string from 8 to 63 characters.
Page 87: Manage The Iot Wifi Network Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage the IoT WiFi network settings You can set up four WiFi networks for your Orbi Pro network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access.
Page 88: Change The Iot Wifi Password Or Security Level
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. To allow the IoT devices to see each other on the Wireless 3 network, and to allow them to access resources on the local network, select the Allow IoT devices to see each other and access my local network check box.
Page 89 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To change the IoT WiFi network password or WPA settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 90: Set Up A Guest Wifi Network And Captive Portal
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 between the WiFi client and the RADIUS server, which provides the actual authentication. When you select this option, additional fields display so that you can specify the RADIUS server. Do the following: a.
Page 91 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To set up a guest network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 92: Set Up A Guest Network With A Captive Portal
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 10. To set an expiration time for how long visitors can access the Internet, select a time from the Expiration menu. After visitors are authenticated, they can access the Internet for that period of time. If you select Never from the menu, visitor access time is not restricted to any period.
Page 93: Set Up Facebook Wi-Fi
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 9. To set a guest portal password, select the Password Authentication radio button and enter the password in the field. The password must be a minimum of 8 characters and can be a maximum of 64 characters.
Page 94 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 ATTENTION: If a user attempts to access a website over HTTP (by default, over port 80), the user is directed to the Facebook Login page. If a user attempts to accesses a secure website over HTTPS (by default, over port 443), a Security Waning window opens in their web browser.
Page 95: Manage The Download Bandwidth Per Ssid
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 11. On the Facebook Wi-Fi Configuration page, do the following: a. From the Select a Page menu, select a Facebook business page. b. Select the bypass mode option: • Skip check-in link. To allow customers to skip check-in, select the Skip check-in link radio button.
Page 96 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 In setting the download bandwidth ratio for an SSID, consider the number and type of devices that connect to the SSID and the typical download bandwidth usage for those devices. For example, more devices might connect to the IoT WiFi network than to the employee network, but the typical bandwidth usage for IoT devices might be lower than for employee devices.
Page 97: View Or Change Advanced Wifi Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 As you move an icon, the bandwidth ratio for the WiFi network changes and the percentage displays in the icon. All bandwidth ratios together add up to 100 percent of the available download bandwidth.
Page 98: Use The Router As A Wifi Access Point
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Use the router as a WiFi access point You can set up the router to run as an access point (AP) on the same local network as another router or gateway. For example, you can use the Orbi router as a WiFi access point that connects to a gateway or modem router that you already use for your Internet service.
Page 99: Set Up Router Mode
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 8. Click the Apply button. The IP address of the router changes, and you are disconnected. 9. To reconnect, close and restart your browser and enter orbilogin.com. Set up router mode If you set up your router as an access point, you can change it back to a router.
Page 100: Enable Or Disable Implicit Beamforming
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To generate a new backhaul password: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 101: Enable Or Disable Mu-Mimo
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. Click the Apply button. Your settings are saved. If you connected over WiFi to the network, you are disconnected from the network and must reconnect. Enable or disable MU-MIMO Multiuser multiple input, multiple output (MU-MIMO) improves performance when multiple MU-MIMO-capable WiFi clients transfer data at the same time.
Page 102: Enable Or Disable Protected Management Frames
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Enable or disable Protected Management Frames Protected Management Frames (PMF), according to the 802.11w standard, is a security feature that protects unicast and multicast management frames from being intercepted and changed for malicious purposes. The PMF feature is disabled by default, but you can enable it as a requirement for management frames.
Page 103: Check Your Internet Bandwidth
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Your settings are saved. Check your Internet bandwidth You can use Ookla Speedtest to detect your Internet bandwidth. To check your Internet bandwidth using Speedtest: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 104: Set Up A Bridge For A Port Group
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Set up a bridge for a port group If the devices that are connected to the router’s Ethernet port an IPTV device, your ISP might require you to set up a bridge for a port group for the router’s Internet interface. A bridge with a port group prevents packets that are sent between the IPTV device and the router’s Internet port from being processed through the router’s network address translation (NAT) service.
Page 105 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 packets that are sent between the IPTV device and the router’s Internet port from being processed through the router’s Network Address Translation (NAT) service. You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group.
Page 106: Improve Network Connections With Universal Plug And Play
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 (Continued) Field Description Priority Enter a value from 0 to 7. Select the check box for a wired Ethernet port. If your device is connected to an Ethernet port on the router, select the Ethernet port check box that corresponds to the Ethernet port on the router to which the device is connected.
Page 107 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 5. Select the Turn UPnP On check box. By default, this check box is selected. UPnP for automatic device configuration can be enabled or disabled. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically control router resources, such as port forwarding.
Page 108: Chapter 6 Manage Your Network
Manage Your Network This chapter describes the router settings for administering and maintaining your router and home network. The chapter includes the following sections: • Update the router and satellite firmware • Change the admin password • Enable admin password reset •...
Page 109: Update The Router And Satellite Firmware
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Update the router and satellite firmware You can use the router web interface to check if new firmware is available and update your router and satellite, or you can manually update the firmware for your router and satellite.
Page 110: Manually Update Firmware
Orbi device to finish updating before updating your next Orbi device. To manually update the firmware on your Orbi router and satellite, follow these high level steps: 1. Visit netgear.com/support and download the firmware for both your Orbi router and satellite. 2. Update the firmware on your Orbi satellite.
Page 111: Manually Update Satellite Firmware
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manually update satellite firmware We recommend that you update your satellite’s firmware before you update the router’s firmware. To manually update your satellite’s firmware: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 112: Change The Admin Password
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To manually update your router’s firmware: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 113: Enable Admin Password Reset
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Page 114: Reset The Admin Password
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Reset the admin password If you set up the password reset feature, you can reset your router admin password if you forgot it. To reset your admin password: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 115: Display Internet Port Statistics
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Page 116: Check The Internet Connection Status
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Up Time. The time elapsed since this port acquired the link. Poll Interval. The interval at which the statistics are updated in this page. 6. To change the polling frequency, enter a time in seconds in the Poll Interval field and click the Set Interval button.
Page 117: View Satellites, Wifi Devices, And Wired Devices Connected To The Orbi Network
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. To refresh the page, click the Renew button. 8. To exit the page, click the Close Window button. View satellites, WiFi devices, and wired devices connected to the Orbi network You can view all satellites, WiFi devices, and wired devices that are connected to your Orbi network.
Page 118: View Satellite Status
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 • MAC Address. The device MAC address. The unique MAC address for each device does not change. • Channel. The channel on which the device is connected to the WiFi network. •...
Page 119: View And Manage Logs Of Router Activity
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 View and manage logs of router activity The log is a detailed record of the websites users accessed or attempted to access and many other router actions. You can specify which actions are logged. Up to 256 entries can be stored in the log.
Page 120: Set Up A Syslog Server
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 • VPN Service. Selected by default. • Insight. Cleared by default. 6. To refresh the log page, click the Refresh button. 7. To clear the log entries, click the Clear Log button. 8.
Page 121: Monitor Internet Traffic
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Monitor Internet traffic Traffic metering allows you to monitor the volume of Internet traffic that passes through the router Internet port. You can set limits for traffic volume. To monitor Internet traffic: 1.
Page 122: Manage The Router Configuration File
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 9. If you want the router to issue a warning message before the monthly limit of Mbytes or hours is reached, in the Traffic Control section, enter a numeric value. By default, the value is 0 and no warning message is issued. 10.
Page 123: Manage The Automatic Backup Options
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage the automatic backup options You can let the router automatically back up configuration settings before a firmware upgrade. You can also schedule an automatic backup at a regular interval. To manage the automatic backup options: 1.
Page 124: Restore Configuration Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays.
Page 125: Set Up Remote Management
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Set up remote management You can access your router over the Internet to view or change its settings. You must know the router’s WAN IP address to use this feature. For information about Dynamic DNS, see Manage Dynamic DNS on page 67.
Page 126: Use Remote Access
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. Specify the port number for accessing the router. Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote router access. Choose a number from 1024 to 65535, but do not use the number of any common service port.
Page 127: Chapter 7 Customize Internet Traffic Rules For Ports
Customize Internet Traffic Rules for Ports You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features. This chapter includes the following sections: • Manage port forwarding to a local server •...
Page 128: Manage Port Forwarding To A Local Server
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage port forwarding to a local server If your home network includes a server, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet.
Page 129: Add A Custom Port Forwarding Service
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The service displays in the list. Add a custom port forwarding service To add a custom service: 1. Find out which port number or range of numbers the application uses. You can usually find this information by contacting the publisher of the application or user groups or news groups.
Page 130: Edit A Port Forwarding Service
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Edit a port forwarding service To edit a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 131: Delete A Port Forwarding Entry
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Delete a port forwarding entry To delete a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 132: How The Router Implements The Port Forwarding Rule
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 How the router implements the port forwarding rule The following sequence shows the effects of a port forwarding rule: 1. When you type the URL www.example.com in your browser, the browser sends a web page request message with the following destination information: •...
Page 133: Add A Port Triggering Service
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Add a port triggering service To add a port triggering service: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Page 134: Enable Port Triggering
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Enable port triggering To enable port triggering: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 135 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 also allow incoming traffic on port 113 to reach the originating computer.” The following sequence shows the effects of the port triggering rule you define: 1. You open an IRC client program to start a chat session on your computer. 2.
Page 136: Chapter 8 Use Vpn To Access Your Network
Use VPN to Access Your Network You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This chapter explains how to set up and use VPN access. This chapter includes the following sections: • Set up a VPN connection •...
Page 137: Set Up A Vpn Connection
To use a DDNS service, register for an account with a host name (sometimes called a domain name). You use the host name to access your network. The router supports these accounts: NETGEAR, No-IP, and Dyn. If your Internet service provider (ISP) assigned a static WAN IP address (such as 50.196.x.x or 10.x.x.x) that never changes to your Internet account, the VPN can use that IP address...
Page 138: Install Openvpn Software
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 6. To change the service type, scroll down and select the TCP radio button. 7. To change the port, scroll down to the Service Port field, and type the port number that you want to use.
Page 139 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 9. In the Windows Installer section of the page, double-click the openVPN-install-xxx.exe link. 10. Download and install the Open VPN software on your computer, click the openVPN-install-xxx.exe file. 11. Click the Next button. 12.
Page 140 For a client device with Windows 64-bit system, the VPN client is installed at C:\Programfiles\OpenVPN\config\ by default. 18. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN: a. On your computer, go to the Networks page. If you are using Windows 10, select Control Panel >...
Page 141: Install Openvpn Software On Your Mac Computer
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 For more information about using OpenVPN on your Windows-based computer, visit https://openvpn.net/index.php/open-source/documentation/howto.html#quick. Install OpenVPN software on your Mac computer You must install this software on each Mac computer that you plan to use for VPN connections to your router.
Page 142: Install Openvpn Software On An Ios Device
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Install OpenVPN software on an iOS device You must install this software on each iOS device that you plan to use for VPN connections to your router. To install VPN client software on an iOS device: 1.
Page 143: Use A Vpn Tunnel On Your Windows-Based Computer
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To install VPN client software on an Android device: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Page 144 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 connected. If both networks use the same LAN IP scheme, when the VPN tunnel is established, you cannot access your home router or your home network with the OpenVPN software. The default LAN IP address scheme for the router is 192.x.x.x.The most common IP schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x.
Page 145: Use Vpn To Access Your Internet Service At Home
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Use VPN to access your Internet service at home When you’re away from home and you access the Internet, you usually use a local Internet service provider. For example, at a coffee shop you might be given a code that lets you use the coffee shop’s Internet service account to surf the web.
Page 146: Block Vpn Client Internet Access In The Router
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 8. Click the FOR WINDOWS or FOR MACOSX button and download the configuration files for your VPN clients. 9. Unzip the configuration files and copy them to the folder where the VPN client is installed on your device.
Page 147: Use A Vpn Tunnel To Access Your Internet Service At Home
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 For a client device with Windows 64-bit system, the VPN client is installed at C:\Programfiles\OpenVPN\config\ by default. Use a VPN tunnel to access your Internet service at home To access your Internet service: 1.
Page 148: Chapter 9 Troubleshooting
This chapter provides information to help you diagnose and solve problems you might experience with your Orbi router or satellite. If you do not find the solution here, check the NETGEAR support site at support.netgear.com for product and contact information. This chapter includes the following sections: •...
Page 149: Quick Tips
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Quick tips This section describes tips for troubleshooting some common problems. Sequence to restart your network When you restart your network, follow this sequence: 1. Turn off and unplug the modem. 2.
Page 150 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To sync the router and the satellite: 1. Place the satellite in the same room as the Orbi router. Use this satellite location only during the sync process. 2. Connect the satellite to a power source. 3.
Page 151: You Cannot Log In To The Router
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 10. If the satellite’s ring LED lights magenta, the satellite did not resync with the router. If they successfully synced when they were placed in the same room, do one of the following: •...
Page 152: Troubleshoot Internet Browsing
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 7. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router did not obtain an IP address from your Internet service provider (ISP). If your router cannot obtain an IP address from the ISP, you can force your cable or DSL modem to recognize your new router by restarting your network.
Page 153: Troubleshoot Pppoe
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Reboot the computer and verify that the router address (www.routerlogin.net) is listed by your computer as the default gateway address. • You might be running login software that is no longer needed. If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run that software after installing your router.You might need to go to Internet Explorer and select Tools >...
Page 154: Troubleshoot Wifi Connectivity
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Troubleshoot WiFi connectivity If you are experiencing trouble connecting to the Orbi WiFi network, try to isolate the problem: • Does the WiFi-enabled computer or mobile device that you are using find your WiFi network? If you disabled the router’s SSID broadcast, then your WiFi network is hidden and does not display in the list of networks that your computer or WiFi device finds.
Page 155: Test The Path From Your Computer To A Remote Device
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 ping www.routerlogin.net 3. Click the OK button. You should see a message like this one: Pinging <IP address > with 32 bytes of data If the path is working, you see this message: Reply from <...
Page 156 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 If you do not receive replies, check the following: • Check to see that the IP address of your router is listed as the default gateway for your computer. If DHCP assigns the IP configuration of your computers, this information is not visible in your computer Network Control Panel.
Page 157: Appendix A Supplemental Information
Supplemental Information This appendix covers the following topics: • Factory settings • Technical specifications...
Page 158: Factory Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Factory settings The following factory settings information are for the Orbi Pro router (model SRR60) and the Orbi Pro satellite (model SRS60). You can return the Orbi Pro router or satellite to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router or satellite for at least seven seconds.
Page 159 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Table 4. Factory default settings for the router (Continued) Feature Default Setting Time zone GMT for WW, except NA and GR GMT+1 for GR GMT-8 for NA Time zone adjusted for daylight saving time Disabled SNMP Disabled...
Page 160: Factory Settings For Orbi Pro Satellite Model Srs60
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Factory settings for Orbi Pro satellite model SRS60 The following table shows the factory default settings for the Orbi Pro satellite. Table 5. Factory default settings for the satellite Feature Default Setting Router login User login URL orbilogin.com...
Page 161 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Table 5. Factory default settings for the satellite (Continued) Feature Default Setting WiFi WiFi communication Enabled SSID name See satellite label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US Otherwise, varies by region RF channel 2.4 GHz fronthaul...
Page 162: Technical Specifications
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Technical specifications The following are the technical specifications for Orbi Pro router (model SRR60) and Orbi Pro satellite (SRS60). Technical specifications for Orbi Pro router model SRR60 The following table shows the technical specifications for the router. Table 6.
Page 163: Technical Specifications For Orbi Pro Satellite Model Srs60
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Table 6. Orbi Pro router specifications (Continued) Feature Description Operating frequency range 2.4 GHz (US) 2.412–2.462 Operating frequency range 2.4 GHz (Europe ETSI) 2.412–2.472 GHz Operating frequency range 5 GHz (US) 5.18 GHz–5.24 GHz 5.745 GHz–5.825 GHz Operating frequency range 5 GHz (EU)
Page 164 Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Table 7. Orbi Pro satellite specifications (Continued) Feature Description 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WiFi Maximum wireless signal rate complies with the IEEE 802.11 standard. Radio data rates 2.4 GHz: Max. 400 Mbps 5 GHz Front haul: Max.

This manual is also suitable for:

Srr60 Srs60 Orbi pro

NETGEAR SRK60B03 User Manual

Chapter 1 Overview

Chapter 2 Connecttotheorbipronetworkandaccesstherouter

Chapter 3 Specify Your Internet Settings

Chapter 4 Control Access to the Internet

Chapter 5 Specify Network Settings

Chapter 6 Manage Your Network

Chapter 7 Customize Internet Traffic Rules for Ports

Chapter 8 Use VPN to Access Your Network

Chapter 9 Troubleshooting

Appendix A Supplemental Information

Quick Links

Need help?

Questions and answers

Related Manuals for NETGEAR SRK60B03

Summary of Contents for NETGEAR SRK60B03

This manual is also suitable for:

Table of Contents