First Alert FA168C Programming Manual page 6

DOWNLOAD INFORMATION ( 94, 95)
94 DOWNLOAD PHONE No.
RING COUNT FOR DOWNLOADING
95
PAGER OPTIONS (*160-*172)
160 PAGER 1 PHONE No.
161 PAGER 1 CHARACTERS
162 PAGER 1 REPORTING OPTIONS
163 PAGER 2 PHONE No.
164 PAGER 2 CHARACTERS
165 PAGER 2 REPORTING OPTIONS
166 PAGER 3 PHONE No.
167 PAGER 3 CHARACTERS
168 PAGER 3 REPORTING OPTIONS
169 PAGER 4 PHONE No.
170 PAGER 4 CHARACTERS
171 PAGER 4 REPORTING OPTIONS
172 PAGER DELAY OPTION FOR ALARMS
MISCELLANEOUS SYSTEM FIELDS (*174-*181)
174 CLEAN ME REPORTING OPTIONS
(for ESL smoke detectors)
177 DEVICE DURATION 1, 2
(used in *80 Menu mode-Device Actions 5/6)
181 50/60 HERTZ AC OPERATION
| | | | | | |
Enter up to 20 digits, 0–9; #+11 for ' '; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused
spaces. If fewer than 20 digits, exit field by pressing
entries from field, press 94 . UL: downloading may be performed only if a technician is at the site.
[15]
| | | | | | |
Enter up to 20 digits. 0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
| | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
Part. 1 Part. 2 common
[0,0,0]
| | | | | | |
Enter up to 20 digits. 0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
| | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
Part. 1 Part. 2 common
| | | | | | | |
Enter up to 20 digits. 0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
| | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
0,0,0]
Part. 1 Part. 2 common
| | | | | | | |
Enter up to 20 digits. 0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
| | | |
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' '; #+12 = '#'; #+13 = 2-second pause.
[0,0,0]
Part. 1 Part. 2 common
[3]
[0]
[0] [0]
1 2
[0]
– 6 –
| | | | | | | |
(and press 95, if entering next field). To clear
0 = Disable Station Initiated Download;
1–14 = number of rings (1–9, # +10 =10, # +11 =11,
# +12 =12, # +13 =13, # +14 =14);
15 = answering machine defeat (# +15 =15).
NOTE: Do not enter "0" if using 4285/4286 Phone Module.
| | | | | | | |
| | | | | | | |
For each partition, select from the following options:
0 = no reports sent
1 = Open/closes all users
4 = All alarms and troubles
5 = All alarms / troubles, and open/closes for all users
12 = Alarms / troubles for zones entered in zone list 9
13 = Alarms / troubles for zones entered in zone list 9,
and open\closes for all users
| | | | | | | |
| | | | | | | |
See field *162 for reporting options. Select for each
[0,0,0]
partition (use zone list 10 if using options 12 or 13).
| | | | | | | | |
| | | | | | | |
See field *162 for reporting options. Select for each
partition (use zone list 11 if using options 12 or 13).
| | | | | | | | |
| | | | | | | |
See field *162 for reporting options. Select for each
partition (use zone list 12 if using options 12 or 13).
0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes
This delay is for ALL pagers in the system.
NOTE: The delay does not reset for new alarms
occurring while an existing pager delay is in progress.
0 = disable; 1 = Clean Me signal reports;
Note: If Clean Me is enabled, you must enter "3" in
field 56 programming for zone 1 response time.
0 = 15 seconds
1 = 30 seconds
2 = 45 seconds
3 = 60 seconds
4 = 90 seconds
5 = 2 minutes
0 = 60 Hz; 1 = 50 Hz
| | | |
| | | |
| | | |
| | | |
| | | |
| |
| | |
| |
| | |
6 = 2-1/2 min #+11 = 7 min
7 = 3 min #+12 = 8 min
8 = 4 min #+13 = 10 min
9 = 5 min #+14 = 12 min
#+10 = 6 min #+15 = 15 min