DEC TLZ09 Owner's Manual page 35

Table 5-1 (Cont.) TLZ09/TLZ10 LED Status
Condition
Reset sequence
Power-on with
POST enabled
Tests Complete, No
Failure
Self-Test failure
Power-On with
POST disabled
Error Rate Warning
Drive mechanism
failure (may be
recoverable)
Drive mechanism
failure
(unrecoverable, fatal
error)
Drive cleaning
request (timer
expired)
DIGITAL TLZ09/TLZ10 Cassette Tape Drive and TLZ9L/TLZ1L Autoloader Owner's Manual 5–3
Using the TLZ09/TLZ10 Cassette Tape Drive
Busy LED Tape LED
Flashes on for 1 Off, then indicates
second tape load status.
Off for two Off for two
seconds, then seconds, then
flashes twice in flashes twice in one
one second. Then second. Then
flashes in sequence flashes in sequence
with Tape and with Busy and
Status LEDs left to Status LEDs, left to
right. This repeats right. This repeats
until self-tests until self-tests
complete. complete.
Normal operation Normal operation
Not applicable Not applicable
Off for two Same as Busy
seconds, then
flashes twice in
one second
Not applicable One long flash
every four seconds.
Media may need
changing or drive
needs to be
cleaned.
Not applicable Not applicable
Flashes once every Not applicable
1.25 seconds
Not applicable Not applicable
Status LED
Off, then indicates
write-protect status.
Off for two seconds,
then flashes twice in
one second. Then
flashes in sequence
with Busy and Tape
LEDs, left to right.
This repeats until
self-tests complete.
Normal operation
Flashes twice every
1.25 seconds with
the flashes
occurring close
together, then some
delay.
Same as Busy
Not applicable
Flashes once every
1.25 seconds
Not applicable
One long flash
every four seconds.
Clean drive.