DEC TLZ09 Owner's Manual page 32

Verifying TLZ09/TLZ10 Cassette Tape Drive Installation
4. If the Status LED flashes twice every 1.25 seconds with the flashes occurring close
together followed by some delay, then POST failed. Attempt to clear the failure by re-
executing POST. (Power off and power on the drive.) If the failure repeats itself, call
Multivendor Customer Services.
After successful execution of POST, have your system manager restart the system and
assign a device name to your TLZ09 or TLZ10 drive if necessary. Optionally, you can run
a full system or SCSI bus test. See your system owner's manual for specific instructions.
__________________________ Note ____________________________
If a tape is loaded, the Tape indicator stays on. If the tape is write-protected, the
Status indicator will also remain on.
___________________________________________________________
4–2 DIGITAL TLZ09/TLZ10 Cassette Tape Drive and TLZ9L/TLZ1L Autoloader Owner's Manual