Installing The Twain Driver Using Plug And Play Under Windows Me/98 Se - Olympia Omega 1630 User Manual

3
Installing the TWAIN Driver Using Plug and Play Under Windows Me/
98 SE
1
With Windows running, insert the CD-ROM into your computer's CD-
ROM drive.
2
Turn on the copier.
3
When the copier is ready, connect it to the computer with the USB ca-
ble.
H The "Add New Hardware Wizard" dialog box appears.
4
Click [Next], and then select
vice (Recommended)
H
Click [Next] again.
5
Select [Specify a location], and then click [Browse...].
6
Browse to "Driver\(language)\Win9x" on the CD-ROM, and then click
[OK].
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win9x
7
Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
8
The "Add New Hardware Wizard" dialog box appears again.
H
Repeat steps 4 through 7.
Note
Repeat steps 4 through 7 until the installation is completely finished.
This completes the installation of the TWAIN driver.
3-4
Installing the TWAIN Driver
Search for the best driver for your de-
on the next dialog box.