Lateral Adjustment Of The Thread Catcher - Pfaff 335 Instruction Manual

11.

Lateral adjustment of the thread catcher

05.07
Requirement
With the needle bar at its bdc, the tip of the thread catcher 3 must point exactly at the
middle of the needle.
Fig. 11 - 21
Remove knife 1 (screws 2).
Bring the needle bar to its bdc by turning the handwheel.
Align the thread catcher 3 (screws 4) laterally in accordance with the requirement.
Activate the magnet core manually and turn the handwheel until the needle bar is at its
tdc. Take care to ensure that the thread catcher 3 does not come into contact with the
thread bobbin case position-finger 6 during its course of movement.
Screw on knife 1 (screws 2).
3
6
1
2
4
Adjustment
5
11 - 22