Rps - Bosch B9512G Owner's Manual

Control Panels
16.3.4 Notification Test
Use this menu to test the security system's ability to send
personal notification messages to the destination path
designated by your security company.
Testing notifications:
1. Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [Test] to open the menu.
4. Press [Notification Test] to open the menu.
5. The keypad shows the first properly configured notification
path. Use
and then press [ENTER]. The control panel sends a test
notification, and then returns to idle text.

16.4 RPS

Use the RPS menu for connection to Remote Programming
Software (RPS). Your security company uses RPS to configure
and service your security system. RPS is intended for use by
professional or licensed installers only.
16.4.1 Answer
Use the Answer option to answer the phone (pick up the phone
line) to connect to RPS.
Using the Answer menu option to answer an incoming call from
RPS:
Bosch Security Systems, Inc.
/[NEXT] to go to the desired notification path,
B94x/B93x Actions menu | en
2015.01 | 02 | F.01U.307.371
79