Bosch B9512G Owner's Manual page 137

Control Panels
24.1.1 All On
Turning an area All On turns on all points in the area and provides
entry and exit delay. For example, you can turn on the area and
leave through a door (within exit delay time) without creating an
alarm event. When you turn the area All On, the display shows
how many seconds of exit delay time remain to exit the protected
area. Leave before the exit delay time expires.
Leaving after exit delay expires causes entry delay to start. It may
also cause an alarm on an interior device. Enter your passcode to
turn off the system.
Turning areas All On:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Press [1] or [ENTER] to open the All On menu.
4. Press [1] or [ENTER] to select All On Delay.
5. Enter your passcode and press [ENTER]. The keypad shows
Exit Now! and sounds during the exit delay.
6. Exit the area or enter your passcode to stop the system from
turning on. If you turn your system All On and don't exit, the
system automatically switches to Part On.
Bosch Security Systems, Inc.
B92x/B91x On/Off menu | en 137
2015.01 | 02 | F.01U.307.371