Performance Control Settings; Thermal Roll-Back; Power Seating Operation Through The Joystick - Quickie Xplore 2 Hybrid Owner's Manual

E. PERFORMANCE CONTROL SETTINGS
NOTE - Seek advice regarding checking and adjusting settings.
It is vital to match control settings to your level of function and
ability.
Consult your health care professional and your supplier to select
the best control setting for you. For your safety, have the setting of
your chair verified every six months.
Have your control settings re-adjusted immediately if you notice
any change in your ability to:
□
Control the joystick.
□
Avoid running into objects.
4. Control Settings can be adjusted by your dealer.
F. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the
controller from damage due to overheating. In extreme conditions
(such as repetitive hill climbing) the circuit will decrease the power
to your motors. This allows the chair to operate at a reduced
speed. When the controller cools, the chair will return to normal
speed.
G. POWER SEATING OPERATION THROUGH THE
JOYSTICK
The power tilt, recline, seat lift, elevating legrests or center mount
features on your chair can be operated using the joystick on your
chair.
1. 6-Key VR2 Joystick (Activates power tilt or seat lift only)
PRESS
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
A. For tilt or seat lift operation through this joystick, you must
press the mode switch to access seating options.
B. Once you have accessed the seating mode in your joystick,
you must pull the toggle to activate the power option, and push
the toggle in the opposite direction to return to the static mode.
Quickie Xplore 2 Owner's Manual
WARNING
2. R-net EL Joystick (Activates multiple power options)
PRESS
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
A. For tilt or seat lift operation through this joystick, you must
press the mode switch to access seating options.
B. Once you have accessed the seating mode of your joystick,
you must toggle left or right until the light showing the power
option you want to activate turns on.
C. Once you have accessed the seating mode in your joystick,
you must pull the toggle to activate the power option, and push
the toggle in the opposite direction to return to the static mode.
3. R-net PM Joystick (Activates multiple power options)
PRESS
TOGGLE
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
A. For tilt or seat lift operation through this joystick, you must
press the mode switch to access seating options.
B. Once you have accessed the seating mode of your joystick,
you must toggle left or right until the light showing the power
option you want to activate turns on.
C. Once you have accessed the seating mode in your joystick,
you must pull the toggle to activate the power option, and push
the toggle in the opposite direction to return to the static mode.
Rev. A
TOGGLE
19