Circuit Breakers; Joystick Assembly; Enhanced Display; Motor Locks - Quickie Xplore 2 Hybrid Owner's Manual

C.CIRCUIT BREAKERS
Your Quickie Xperience has a single circuit breaker.
• In the unlikely event of a short circuit or heavy overload, all
power to your chair will be shut off.
• To reset your chair, depress the circuit breaker button. A few
minutes wait is required before the circuit breaker will reset.
To access the circuit breaker
• Pull triggers together (a).
• Drop the panel down and the circuit breaker becomes visible (a).
• Reset the circuit breaker.
• Lock the panel back in it's upright position.
Repeated Shutdown:
If the chair continues to shut down after resetting, have it serviced
by a supplier.
D. JOYSTICK ASSEMBLY
The joystick connects to a controller, which controls the
chair's performance. The joystick varies based on the option
selected for you.
1. VR2 Joystick *
2. R-Net (Option)*
*Please refer to the user's manual provided with information
package.
E.ENHANCED DISPLAY
Please refer to the P & G Enhanced Display owner's manual.
F. MOTOR LOCKS
Disconnect the motor locks when you need to manually push
the chair. (For example, in an emergency, or if batteries fail).
1. Do not disengage motor locks unless power to the chair is off.
2. Be aware that the chair will not have brakes in the freewheel
position.
3. Make sure that the person pushing the chair has full control
when motor locks are disengaged.
1. To Disengage Motor Locks:
Pull the lever (b) towards you (from the back) to disengage the
motor lock.
2. To Engage Motor Locks:
Push the lever in to return to the drive position.
Q-NOTE- If the lever is difficult to disengage, rock the
wheelchair slightly from front to rear and/or push against the chair
while moving the lever.
Quickie Xplore 2 Owner's Manual
WARNING
a
VR2
Rev. A
R-Net
18