J.seat Depth; Power Recline Tilt/Lift Operation; Operating Guide; Performance Control Settings - Quickie Xplore Owner's Manual

J. SEAT DEPTH
The seat depth can be adjusted in one inch increments on standard
rehab seating.
1. Seat Frame Depth Adjustment
a. To adjust, loosen the two bolts (a & b) of the backrest
pivot plate on each side of the seat.
b. Reposition the backrest to the desired position.
c. Retighten bolts on each side of the backrest pivot plate.
2. Back Angle Adjustment on Seat Frame
a. Remove the securing bolt (d) on the side of the backrest
hinge plate.
b. Loosen the lower rear bolt (e)
c. Set at desired angle. There are 10 holes (in 3º incre-
ments) to choose from, providing adjustment from 87º to
117º.
d. Reinstall the front bolt and tighten both bolts securely.
K. POWER RECLINE TILT/LIFT OPERATION
The power recline, tilt , and lift features on your chair can be
operated using the joystick on your chair. Please refer to the AMY-
SYSTEMS user's manual provided with the information package.
IX. OPERATING GUIDE
A. PERFORMANCE CONTROL SETTINGS
Q-NOTE- Seek advice regarding checking and adjusting
settings.
It is vital to match control settings to your level of function
and ability.
Consult your health care professional and your supplier to
select the best control setting for you.
For your safety, have the setting of your chair verified every
six months.
WARNING
Have your con- trol settings re-adjusted immediately if
you notice any change in your ability to:
• Control the joystick.
• Avoid running into objects.
4.Control Settings can be adjusted by your dealer.
B. THERMAL ROLL-BACK
Your chair has a thermal rollback circuit. Which protects the
controller from damage due to overheating. In extreme condi-
tions (such as repetitive hill climbing) the circuit will decrease the
power to your motors. This allows the chair to operate at a
reduced speed. When the controller cools, the chair will return
to normal speed.
Quickie Xplore Owner's Manual Rev. B
e
d
a b c
17.