Table of Contents
Advertisement
PUBLIC ADDRESS: Press the MENU button
until "PUB ADDR" appears in the display. Press
PTT to transmit in PA mode.
SCAN ADD/DELETE: Press the MENU button
until "SCAN A/D" appears in the display. Use the
GROUP/SEL- button to step through the group
selections for the current system. Use the
GROUP/SEL + button to change the scan state.
An "S" is illuminated to the right of the display if
the group/channel has SCAN enabled.
ALARM ON/OFF: Press the MENU button until
"ALM ON" or "ALM OFF" appears in the display.
Press the GROUP/SEL + or - buttons until the
desired state is selected. (Note: This enables or
disables the external alarm; e.g. horn or lights.)
STATUS: Press the MNU button until "STATUS"
appears in the display. To review or change the
se lec ti on,use the GROUP/SEL ke ys
to
view/change the selection of the status message.
When the desired status is displayed, press the PTT
switch to initiate the status transmission.
MESSAGE: Press the MNU button until "MES-
SAGE" appears in the display. To review or
change the selection, use the GROUP/SEL keys
to view/change the selection of the message.
When the desired message is displayed, press the
PTT switch to initiate the message transmission.
SCN
Momentary switch. Press the SCN button to en-
able or disable scan operation. The SCN indicator
will light when scan is enabled. Pressing and
holding the SCN button while on a working chan-
nel will permit the user to adjust the squelch setting
from the front panel by using the VOLUME ramp
switch to open and close the squelch.
9
Advertisement
Table of Contents
