Clearing An Emergency; Special Calls; Placing A Telephone Interconnect Call; (On Systems Equipped With Interconnect Hardware) - Ericsson TRUNKED MDX Operator's Manual

3. Release the PTT button when the transmission is complete, and listen
for any reply. The TX indicator will go out when you release the PTT
button.

CLEARING AN EMERGENCY

If your radio has been programmed as a supervisory unit, you may clear
emergency calls. When the emergency is no longer in effect, the emergency
call may be cleared as follows:
1. Press and hold the CLR button.
2. Press and release the Home/Emergency button. The EMERGNCY
display goes off.
3. Release the CLR button.

SPECIAL CALLS

The Special Call feature within the Menu operation allows you to make
calls to individual radios, telephone interconnect Calls and/or System All Calls.
Placing A Telephone Interconnect Call (On Systems Equipped With In-
terconnect Hardware)
1. Make sure the radio is turned ON, and the proper System has been
selected. Press the MENU button until the name SPC CALL appears
in the display. Press the GROUP/SEL + or - buttons until the desired
name appears in the display. The number may be entered manually
on the 12 button keypad of the System Model radio.
2. Press the PTT button momentarily and release for a pre-programmed
number. Press the "*" key for a manually entered number on the
System Model radio.
3. The radio automatically transmits the pre-programmed number
stored in the radio's memory. The system dials the number and the
ringing tone is heard on the radio. When the landline party answers,
you may speak to them by pressing the PTT button and talk.
24