Dynamic Range Control (Drc) Settings - Dab - Roberts ecologic 7 Manual

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
1. Press the On/Off button to switch on your radio.
2. Press and release the Menu button so that "Manual tune" appears on
the display.
3. Rotate the Tuning/Select control until the display shows "DRC
value". Press and release the Tuning/Select control to enter the DRC
adjustment mode.
4. Rotate the Tuning/Select control to select the required DRC setting
(default is 0).
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
5. Press and release the Tuning/Select control to confi rm the setting.
The display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
13
2
3-5