Before Using Your Dehumidifi Er; Carrying The Unit - Mitsubishi Electric MJ-E26CX-H Instruction Manual

Before using your dehumidifi er
Set the silver ion fi lter
The silver ion fi lter is supplied with the unit at time of
purchase. Please fi t before using the unit.
Remove the silver ion fi lter
1
from the polyethylene bag.
2
Remove the pre-fi lter.
Performance is unaffected even if the metal fi ns
inside the main unit are slightly bent.
Set the silver ion fi lter into the
3
pre-fi lter.
With the strips facing up, set the silver ion
fi lter inside the tabs on the pre-fi lter.
4
Set the pre-fi lter.
Make sure the silver ion fi lter is attached to the unit.
If it is not, fi ne dust will enter inside the unit and
cause a malfunction.
10
Pull the pre-fi lter
toward you, and
then remove it.
Strips
Tabs (4)
Insert the bottom
tabs into the unit
until they click.
Inserting the water
tank correctly
Check the tank and tank guard,
and insert the tank all the way in.
Tank
Make sure the tank is not broken or cracked
Plug the power cord
into the power socket
If the louvre is open, it closes automatically.

Carrying the Unit

The unit can be transported using the wheels on the bottom.
Check that the water tank is empty and the louvre
is shut before transporting.
Raise handle to transport
The unit may become diffi cult
to move depending on the
direction of the casters. Using
excessive force to move the unit
may cause the unit to fall over.
Do not hold the louvre when
moving the unit.
Do not attempt to carry the unit horizontally.
Tilting the unit will result in the water spilling and
cause a malfunction.
Use the wheels on hard fl at surface.
Lift over doorsills and steps. Refrain from using
the wheels on thick-pile carpet, as this may
damage the carpet.
Do not let the power cord get tangled in the
wheels. Additionally, do not let the power cord
drag, as this may damage the cord.
Tank lid
Tank guard
Make sure the tank
is inserted correctly
Use a 220-240V AC
power socket only.
The current humidity
is indicated.