Page 1
MODEL LL350S Strip Framing Nailer Strip Framing Nailer OPERATING MANUAL AND IMPORTANT! TOOL SCHEMATIC DO NOT DESTROY It is the customer’s responsibility to have all operators and service personnel read and understand this manual...
Page 2
INTRODUCTION The PASLODE LL350S strip nailer is a quality-built tool designed for use in DIY and residential framing applications. This tool will deliver efficient, dependable performance when used according to the manufacturer’s guidelines. Please study this manual including the safety used according to the manufacturer s guidelines.
TOOL AND FASTENER SPECIFICATIONS TOOL SPECIFICATIONS MODEL NO. LL350S HEIGHT 14.5” WIDTH WIDTH 4.25” 4.25 LENGTH 18.5” WEIGHT 8.5 lbs OPERATING PRESSURE 80 to 110 p.s.i. (5.5 to 8.0 bars) FASTENER SPECIFICATIONS NAIL TYPE 30-35⁰ paper collated strip framing nails NAIL LENGTH 2” to 3 1/2”...
Use only parts specifically designed and recommended by work contacting element, to help prevent Paslode for use in the tool and for work to be done. Using accidental firing. Never tamper with, disable or remove unauthorized parts and fasteners or modifying the tool in any the work contacting element.
TOOL OPERATION Switching the Trigger Your Paslode tool requires lubrication before you use it for the first time. Disconnect the air supply The tool is manufactured with a trigger that can be before lubricating before lubricating. Put one drop of oil (included with...
MAINTENANCE ❑ Ensure that all hardware is tight. Paslode® tools are built for ease of maintenance. A few simple details will assure trouble-free operation ❑ Ensure that the work contacting element is and long tool life. Anyone who uses or maintains the...
OPERATOR TROUBLESHOOTING CAUTION Disconnect the tool when performing Repairs or clearing jams. PROBLEM CORRECTIVE ACTION Fasteners will not drive completely aste e s ot d e co p ete y Increase air pressure (do not c ease a p essu e (do ot into wood.
Page 8
PARTS LEGEND LL350S WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool’s operation and present a safety hazard.