Pairing A Bluetoothaudio Device Without A Four-Digit Pin Code - Mazda cx-5 2016 Manual

3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while PIN 0000
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were 4213
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the PIN 0000
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular pairing
code (Usually, "0000" or "1234").
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
4. Press the audio control dial while the
input PIN code is displayed.
PAIRING flashes on the audio
display.
5. Operate the Bluetooth
and set it to the pairing mode while
PAIRING is flashing.
6. When the pairing is completed,
PAIR SUCCESS are displayed after
about 10-30 seconds, after which
PAIR SUCCESS continues to be
displayed for three seconds, and then
the unit returns to the normal display.
®
®
audio device
and
NOTE
®
Some Bluetooth
l
certain amount of time before the
is displayed.
If the pairing failed, "Err" flashes for three
l
seconds .
Pairing cannot be performed while the
l
vehicle is moving. If you attempt to perform
pairing while the vehicle is moving, "PAIR
DISABLE" is displayed .
If seven Bluetooth
l
already been paired to the vehicle, pairing
cannot be performed and "MEMORY
FULL" is displayed. Delete one paired
device to pair another one.
Pairing a Bluetooth
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing mode PAIR DEVICE in the
BT SETUP mode. (Refer to
®
Bluetooth audio set up for details.)
2. Press the audio control dial to
determine the mode. After ENTER
PIN is displayed on the audio display
for three seconds, PIN 0000 is
displayed and the PIN code can be
input.
3. Press the audio control dial while PIN
0000 is displayed. PAIRING flashes
on the audio display.
4. Operate the Bluetooth
and set it to the pairing mode while
PAIRING is flashing.
5. As the Bluetooth
requires a PIN code, input 0000 .
Interior Features
Bluetooth®
audio devices need a
symbol
®
audio devices have
®
audio device
®
audio device
®
audio device
5-77