Table of Contents
Advertisement
Interior Features
Bluetooth®
qBluetooth® Preparation (Type B)
Device pairing
®
To use Bluetooth
the device equipped with Bluetooth
to be paired to the unit using the
following procedure. A maximum of
seven devices including Bluetooth
devices and Hands-Free mobile phones
can be paired.
NOTE
®
The Bluetooth
system may not operate for 1
or 2 minutes after the ignition is switched to
ACC or ON. However, this does not indicate a
problem. If the Bluetooth
connect automatically after 1 or 2 minutes
have elapsed, make sure that the Bluetooth
setting on the device is normal and attempt to
reconnect the Bluetooth
vehicle side.
Pairing Procedure
1. Select the
icon on the home screen
and display the Settings screen.
2. Select the
3. Select
4. Turn the Bluetooth
5. Select
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
device).
7. Select Mazda from the device list
searched by the device.
5-86
audio and Hands-Free,
®
®
audio
®
system does not
®
device from the
tab.
.
®
setting on.
to display the
®
device (Peripheral
8. (Device with Bluetooth
Input the displayed 4-digit pairing code
into the device.
(Device with Bluetooth
has
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
Connection permission and phonebook
access permission for your mobile
device may be required depending on
the mobile device.
9. If pairing is successful, the functions of
the device connected to Bluetooth
displayed.
10. (Devices compatible with Mazda E-
®
mail/SMS function)
SMS (Short Message Service)
messages, and E-mail for the device
are downloaded automatically. A
download permission operation for
your device may be required
depending on the device.
NOTE
When Call history and messages are
downloaded automatically, each automatic
download setting must be on. Refer to
Communication Settings on page 5-107.
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth
or by activating Bluetooth
first after switching the ignition from OFF
to ACC, the device connection condition
is indicated in the center display.
®
version 2.0)
®
version 2.1
.
®
®
Hands-Free again,
®
Hands-Free
are
Advertisement
Table of Contents
