Pairing Bluetooth Phone/Audio Device; Pairing Your Bluetooth Phone Or Audio Device - Mazda 6 Smart Start Manual

Bluetooth
PAIRING YOUR BLUETOOTH
NOTE:
• For safety reasons, you cannot pair a phone while driving.
• Before pairing your cell phone or audio device, you must manually turn on
the device's Bluetooth
• For customer service and device compatibility:
Toll-free call: 800-430-0153
Website: www.MazdaUSA.com/bluetooth
• IMPORTANT: Set the volume level on your cell phone or audio device to the highest
level before distortion starts, then adjust the volume on the vehicle's audio system.
• When in range of another Wi-Fi device, the Bluetooth connection between your
phone and the system may disconnect for a short time if you have Wi-Fi enabled
Turn off Wi-Fi on your phone if needed.
Without Mazda Connect:
Manually turn Bluetooth on your phone or audio device.
1
Push and release the TALK button on the steering
2
wheel (wait for beep).
From main menu, say, "Setup," then "Pairing Options."
3
Say, "Pair."
4
Say a four-digit code (i.e., "1, 2, 3, 4").
5
Place phone in discovery mode; if necessary, consult
6
your phone's manual or go to www.mazdausa.com/bluetooth.
Select model, Bluetooth, and follow screen prompts.
After phone is recognized, you will be prompted to name the paired phone.
7
With Mazda Connect:
Manually turn Bluetooth on your phone or
1
audio device.
Select Communication from Home screen.
2
Select Settings.
3
Select Bluetooth.
4
Select Add New Device to display the message and switch to the device
5
operation. If this option is grayed out, make sure Bluetooth is turned on at
the top of the menu.
Using the device, perform a search for the Bluetooth
6
(Peripheral device).
7 Select "Mazda" from the device list searched by the device.
• Device with Bluetooth
into the device.
• Device with Bluetooth
code on the audio unit is also displayed on the device, and touch the Yes
on-screen button and then "YES" on the device if needed.
13
®
PHONE OR AUDIO DEVICE
®
function. Refer to the owner's manual for your device.
®
version 2.0 - Input the displayed 4-digit pairing code
®
version 2.1 or higher - Verify the displayed 6-digit
®
Talk
Pick-up Hang up
device
®