Manual Switching; Switching To Low Beams; Switching To High Beams - Mazda cx-5 2016 Manual

qTo Operate the System
The High Beam Control System (HBC)
operates to switch the headlights
automatically between high and low
beams after the ignition is switched ON
and the headlight switch is in the AUTO
and high beam position. At the same time,
the High Beam Control System (HBC)
indicator light (green) in the instrument
cluster illuminates.
The High Beam Control System (HBC)
determines that it is dark based on the
brightness of the surrounding area.
NOTE
When the vehicle speed is 30 km/h (18 mph)
l
or higher, the headlights automatically
switch to high beams when there are no
vehicles ahead or approaching in the
opposite direction.
When the vehicle speed is less than about
20 km/h (12 mph), the High Beam Control
System (HBC) switches the headlights to
low beams.
The low beams may not switch to high
l
beams when cornering.
Operation of the High Beam Control
l
System (HBC) function can be disabled
Refer to Personalization Features on page
9-10.
i-ACTIVSENSE
qManual Switching

Switching to low beams

Shift the lever to the low beam position.
The High Beam Control System (HBC)
indicator light (Green) turns off.

Switching to high beams

Turn the headlight switch to the
position.
The High Beam Control System (HBC)
indicator light (Green) turns off and the
is illuminated.
When Driving
4-95