Table of Contents
Advertisement
Maintenance and Care
Appearance Care
To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
Scratches occur on the paint surface
when:
The vehicle is washed without first
l
rinsing off dirt and other foreign
matter.
The vehicle is washed with a rough,
l
dry, or dirty cloth.
The vehicle is washed at a car wash
l
that uses brushes that are dirty or too
stiff.
Cleansers or wax containing abrasives
l
are used.
NOTE
Mazda is not responsible for scratches
l
caused by automatic car washes or
improper washing.
Scratches are more noticeable on vehicles
l
with darker paint finishes.
To minimize scratches on the vehicle's
paint finish:
Rinse off any dirt or other foreign
l
matter using lukewarm or cold water
before washing.
Use plenty of lukewarm or cold water
l
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
Rub gently when washing or drying the
l
vehicle.
Take your vehicle only to a car wash
l
that keeps its brushes well maintained.
Do not use abrasive cleansers or wax
l
that contain abrasives.
6-66
CAUTION
Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Do not allow
soap to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
Advertisement
Table of Contents
