Table of Contents
Advertisement
Fog Lights
Can be used when the ignition is switched
ON.
Use this switch to turn on the fog lights.
The fog lights will improve visibility at
night and during foggy conditions.
To turn the fog lights on, rotate the fog
light switch to the
The headlight switch must be in the
position before turning on the fog lights.
Fog light switch
To turn the fog lights off, rotate the fog
light switch to the
the headlight switch to the
position.
NOTE
The fog lights will turn off when the
l
headlights are set at high beams.
(With auto-light control)
l
If the fog light switch is in the
and the headlight switch is in the
position, the fog lights will turn on when
the headlights, the exterior lights and
dashboard illumination turn on.
í
position.
position or turn
or
position
Switches and Controls
Turn and Lane-Change
Signals
NOTE
If an indicator light flashes abnormally, one
l
of the turn signal bulbs may be burned out.
A personalized function is available to
l
change the turn indicator sound volume.
Refer to Personalization Features on page
9-10.
qTurn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
qLane-Change Signals
Move the lever halfway toward the
direction of the change
indicator flashes
will return to the off position when
released.
When Driving
Right turn
Right lane change
OFF
Left lane change
Left turn
until the
and hold it there. It
í
4-63
Some models.
Advertisement
Table of Contents
