ESIE05-03
1.4
Procedure of Self-Diagnosis by Remote Controller
The following modes can be selected by using the [Inspection/Test Operation] button on the
The inspection/test
button
remote control.
Indoor unit settings can be made.
Following codes can be checked.
Part 3 – Troubleshooting
Filter sign time
Local
Air flow direction
setting
Others
mode
Depress Inspection/Test Operation
button for more than 4 seconds.
Press Inspection/Test Operation
button once.
Inspection
Malfunction codes
mode
Indoor model code
Outdoor model code
Press Inspection/Test Operation button once.
Depress Inspection/Test Operation
button for more than 4 seconds.
Service
mode
Press Inspection/Test Operation button once.
Normal
mode
Press Inspection/Test Operation button once.
Or after 30 minutes.
After 10 seconds
Test
operation
mode
Troubleshooting
Service data can be obtained.
Malfunciton code history
Temperature data of various sections
Service settings can be made.
Forced fan ON
Air flow direction/volume setting
Thermostat is forcibly turned on.
3–25
1
3 3
4
5