Painting The Body & Body And Wing Installation - Yokomo B-MAX 2 MR Manual

1/10 scale electric 2wd off-road car kit
Table of Contents

Advertisement

31. ボディの塗装&ボディ、ウイングの搭載
Painting the body & Body and Wing Installation
●ボディの塗装
ボディの内側(塗装面)を中性洗剤で油分やホコリを洗い流します。油分やホコリが付着していると、塗装後の剥がれの原因となりますので必ず洗ってください。洗浄後は水分を
しっかり拭取ってください。
塗装する前にウインド部分を塗装しないようボディ裏側からマスキングシートを貼ります。その際にマスキングシートがボディに密着していないとにじみの原因になるので注意し
てください。
塗料はポリカーボネイト専用(パクトラ製カラースプレーなど)を使用してください。スプレー塗料は1回で厚塗りしてしまうと塗料がたれたり、塗りムラができるので、全体に
薄く塗って乾かし2∼3回に分けて塗装するようにしてください。
※ボディ表面の保護シートは塗装後に剥がすようにしてください。
● Painting the body
Wash the inside of the body with luke warm water and a mild soap or detergent (such as liquid dishwashing soap) prior to painting. Oil residue or dust
will prevent the paint from adhering to the painting surface, and possibly cause the paint to peel later on. After washing, thoroughly dry the body to
allow the paint to adhere properly.
Before painting, apply the pre-cut masking decals to the window and light areas on the inside of the body. Press down the edges of the masking tape
to prevent paint from seeping through.
Use a spray paint formulated for use on polycarbonate bodies (such as Pactra brand spray paint). Spray several light coats, as evenly as possible. For
best results, allow each coat to dry before spraying the next coat. Avoid spraying thick, heavy coats. This may cause the paint to run, preventing the
paint from looking uniform in color.
Remove the outer protective film from the body after painting has been completed.
●デカールの貼り方
・ボディ表面の保護シートを剥がしてから行います。
①デカールを台紙も一緒に切り抜きます。
②台紙の端の方を少しカットしてデカールを貼る位置に合わせます。
③位置が決まったら少しずつ台紙を剥がしながら位置がずれないように貼っていきます。
※デカールを貼る際に台紙を全部剥がしてしまうと気泡が入ったりシワの原因になります。
● Applying the decals
① Include the decal backing when cutting out the decals.
② Remove a small piece of backing from one corner of the decal. Position the decal and press the unbacked portion onto the body.
③ Once in position, slowly remove the remaining backing from the decal, and slowly press the decal onto the body.
※ Applying the decals with the backing completely removed may cause bubbles and/or wrinkles to form.
Front
B2-101RM
マスキングシート
Masking Decal
◆反対側にも同様にボディ内側に貼ります。 ◆
For the opposite side, apply in the same
このページで使用するパーツ
Parts used on this page
B2-101RM
マスキングシート
Masking Decal
ZC-BM-2
B-MAX2 デカール ×1
B-MAX2 Decal
ZC-105
マジックテープ × 各 1
Velcro Tape (One of each.)
RC-313M
フードピン ×4
Body Clip
※塗装してからデカールを貼ります。 ※
Apply the decals after painting.
manner to the inside of the body.
ZC-105
マジックテープ
Velcro Tape
ZC-105
マジックテープ
Velcro Tape
マジックテープは半分に
カットして使用します。
Cut the Velcro tape in
half before using.
ZC-105
マジックテープ
Velcro Tape
33
RC-313M
フードピン
Body Clip
RC-313M
フードピン
Body Clip
RC-313M
フードピン
Body Clip

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents