Key Switch - Windsor SC20 10052190 Operating Instructions Manual

1. Solution Control Knob
Controls solution flow to scrub deck.
To increase flow, rotate knob clockwise.
To decrease flow, rotate knob counterclockwise.
If the brush motor is turned off or the direction control
lever is in neutral, the flow is automatically interrupted
until the motor is turned on again. This feature
prevents unintentional draining of the solution tank and
allows the operator to adjust the solution flow to the
scrub deck without resetting each time the scrubbing
operation is interrupted.
2. Brush Switch
Controls the scrub brush motor.
To turn scrub brush on, press the top of the switch. The
brush will not rotate with the direction control lever in
neutral.
To turn the scrub brush off, press the bottom of the
switch.
3. Brush Lift Lever
Raises and lowers the brush.
To lower the brush, lift the lever from the notch, move to
the left, then lower.
To increase brush pressure, lock the lever into the
lowered position.
To raise the brush, lift the lever from its lowered position
and lock into highest notch.
4. Vacuum Switch
Controls the vacuum motor.
To start vacuum motor, press the top of the switch.
To stop vacuum motor, press the bottom of the switch.
86400640 Operator's Manual - Saber Compact 20
5. Squeegee Lift Lever
Raises and lowers the squeegee.
To lower the squeegee, lift and pull the lever to the left
and then lower.
To raise the squeegee, lift the lever and push it to the
right.

6. Key Switch

Controls the power for machine functions.
To turn machine on, rotate key clockwise.
To turn machine off, rotate key counterclockwise.
FOR SAFETY: Always remove the key when
machine is unattended or during service to
prevent unauthorized movement.
7. Propel Buttons (Normally Forward)
Controls the machine direction, scrub brush and
solution flow.
To propel machine forward, push the button on either of
the control handles.
The scrub brush will not rotate and the solution will not
flow to the scrub deck unless a propel button is pushed.
8. Reverse Propel Button
Controls the machine direction in reverse.
To propel machine backward, push the button on the
control panel and one of the buttons on either of the
control handles.
Operations
17