Key Switch - Windsor Saber Cutter SCX264 Operating Instructions Manual

1. Key Switch

2. Brush Pressure Indicator
3. Speed Control Knob
4. Propel Control Lever
5. Reverse Button
6. Brush Switch
7. Actuator Switch
8. Solution Control Knob
9. Vacuum Switch
10. Squeegee Lift Lever
11. Squeegee Pitch Adjustment Knob
12. Squeegee Deflection Adjustment Knobs
13. Battery Charge Level Indicator
14. Parking Brake (Optional)
15. Hour Meter (Optional)
16. Emergency Shut Off Switch (Optional)
1. Key Switch
Controls the power for machine functions.
To turn machine on, rotate key clockwise.
To turn machine off, rotate key counterclockwise.
FOR SAFETY: Always remove the key when
machine is unattended or during service to
prevent unauthorized movement.
2. Brush Pressure Indicator
The brush pressure indicator corresponds to the amp
draw of the scrub brush motors to tell how hard the
motors are working. The green zone indicates medium
or proper operating brush pressure. The red zone
indicates heavy or excessive brush pressure.Operating
in the red zone may cause the brush circuit breakers to
trip.
3. Speed Control Knob
Controls the speed of the machine.
To increase speed, rotate knob clockwise.
To decrease speed, rotate knob counterclockwise.
86400260 Manual Operators - Cutter 24V Deluxe
4. Propel Control Levers
Controls the machine direction, and scrub brushes and
solution flow.
To propel machine forward, squeeze either propel
lever.
The scrub brushes will not rotate and the solution will
not flow to scrub deck with the propel levers in neutral.
5. Reverse Button
Controls the reverse function.
To propel machine backward, push the reverse button
while squeezing either propel lever.
6. Brush Switch
Controls the scrub brush motors.
To turn scrub brushes on, press the bottom of the
switch. The brushes will not rotate with the propel
control levers in neutral.
To turn scrub brushes off, press the top of the switch.
Operations
15