Scope Of Delivery; Intended Use - Waeco MagicComfort MSH200 Installation And Operating Instructions Manual

Scope of delivery

Observe the following instructions when using the seat heater:
 Do not place any sharp or heavy objects on the seat, as the seat heater
could otherwise be damaged.
 Persons with an impaired sensitivity to heat should only operate the seat
heater at level I.
 Do not place any heat insulating objects, such as blankets or coats, on the
seat when the seat heater is switched on.
 The seat heater can be damaged by fluids spilt on the seat.
 Never switch the seat heater on when it is wet.
3 Scope of delivery
No. in fig. 4,
page 3
1
2
3
4
5
6
–
–
–
–
4

Intended use

The MagicComfort MSH200 (item no. 9101700020) seat heater is suitable
for fitting in the front vehicle seats.
NOTICE!
A
For vehicles equipped with side airbags in the seat backrests, seat
occupancy detection or child seat detection, observe the vehicle
manufacturer's specifications.
20
Quantity Designation
2 Seat surface heating element
2 Backrest heating element
2 Switch connection cable
2 Switch
1 Heating element connection
cable – switchbox
1 Switchbox
1 Drill template
12 Double-sided adhesive tape
12 Insulating material
1 Operating manual
MagicComfort MSH200
Item no.
9101700011
9101700012
9101700021
9101700018