Scope Of Delivery; Required Tools - Waeco MagicComfort MSH50 Installation And Operating Instructions Manual

Safety and installation instructions
Caution! WAECO International does not accept any liability for
damages due to the following:
a) Assembly errors
b) Damages to the system caused by mechanical effects and
overvoltages
c) Modifications of the device without the express approval of
WAECO International
d) Use for any purposes other than those described in the
assembly instructions.
No. Quantity
1 2
2 2
3 1
4 4
The following is required for the installation:
– meter rule (see C 1)
– prick punch (see C 2)
– hammer (see C 3)
– drill bits (see C 4)
The following is required for the electrical connection and testing:
– diode test lamp (see C 8)
or voltmeter (see C 9)
– crimp pliers (see C 10)
– insulation tape (see C 11)
Depending on your individual assembly, you may need other screws,
nuts, washers, metal screws and cable clips than those contained in the

scope of delivery.

Scope of delivery
Designation
Heating element, seat (see A1)
Heating element, backrest (see A2)
Connecting cable
w/ relay and switch (see A3)
Double-sided adhesive tape

Required tools

– drilling machine (see C 5)
– screwdriver (see C 6)
– wrench (see C 7)
– electric hair drier (see C 12)
– hatchet iron (see C 13)
– soldering tin (see C 14)
18
Item no.
MSH-S-50
MSH-L-50
MSH-KA-50