Specifications; Cordless Screwdriver Safety Warnings - Makita BFT020F Instruction Manual

ENGLISH
(Original instructions)
1 Battery cartridge
2 Button
3 Red part
4 Indicating lamp
5 Capacity
6 Switch trigger
7 Reversing switch lever
8 Front lamp

SPECIFICATIONS

Model
Fastening Hard joint
torque
Soft joint
(N•m)
-1
No load speed (min )
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
9 LED indicator
10 Adjusting ring
11 Ring
12 Scale
13 Adjusting grip
14 Hole for adjusting grip
15 Yellow line
16 Compression spring
BFT020F BFT021F BFT040F BFT080F BFT122F BFT042F BFT081F BFT123F
0.5 – 2 0.5 – 2
0.5 – 2 0.5 – 2
540 320
200 x 65 x 251 mm
(with Battery Cartridge BH9020/BH9020A)
200 x 65 x 274 mm
(with Battery Cartridge BH9033/BH9033A)
D.C. 9.6 V
ENE033-1
ENF002-1
GEA010-1
1 – 4 3 – 8 5 – 12
1 – 3.5 3 – 6.5 5 – 10
950 540
1.4 kg
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
17 Bit
18 Sleeve
19 Range of fastening capacity
20 Revolution angle (°)
21 Torque (N•m)
22 Limit mark
23 Brush holder cap
24 Screwdriver
1 – 4 3 – 8
1 – 3.5 3 – 7.5
320 1,200 700
200 x 71 x 242 mm
(with Battery Cartridge
BH1220C)
200 x 71 x 251 mm
(with Battery Cartridge
BH1233C)
1.5 kg
D.C. 12 V
5 – 12
5 – 12
390
GEB050-2
5