Video - Yamaha RX-V381 Owner's Manual

Video

Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
No image (contents required the HDCP 2.2 -
compatible HDMI device) from the playback
device connected to the unit with HDMI.
The menu of the unit is not displayed on the TV.
Cause
Another input source is selected on the unit.
Another input source is selected on the TV.
The video signal output from the unit is not supported by the TV.
The cable connecting the unit and TV (or playback device) is
defective.
The input video signal (resolution) is not supported by the unit.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
The number of devices connected to the HDMI OUT jack is over
the limit.
The TV (HDMI input jack) does not support HDCP 2.2. (The
Warning message can be displayed on the TV screen.)
The TV is not connected to the unit via HDMI.
Another input source is selected on the TV.
Remedy
Select an appropriate input source with the input selection keys.
Switch the TV input to display the video from the unit.
Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.
If there is no problem with the connection, replace with another cable.
To check the information about the current video signal (resolution), use "Signal
Info." in the "Option" menu (p.49). For information about video signals supported
by the unit, see "HDMI signal compatibility" (p.81).
Refer to the instruction manuals for the TV and check the TV's specifications.
Disconnect some of the HDMI devices.
Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2.
You can display the menu of the unit on the TV only when they are connected
with an HDMI cable. If necessary, use an HDMI cable to connect them (p.19 to
p.20).
Switch the TV input to display the video from the unit (HDMI OUT jack).
72
En