Bluetooth - Yamaha RX-V381 Owner's Manual

Bluetooth®
Problem
Cannot make the unit pair with a Bluetooth
device.
Cannot make a Bluetooth connection.
No sound is produced, or the sound is
interrupted during playback.
Cause
Another Bluetooth device is connected.
This unit and the device are too far apart.
There is a device (microwave oven, wireless LAN, etc.) that outputs
signals in the 2.4 GHz frequency band nearby.
The Bluetooth device does not support A2DP.
Another Bluetooth device is connected.
The Bluetooth function of the device is turned off.
The pairing information has been deleted.
This unit is not registered on the device's Bluetooth connection list. Perform paring again (p.42).
The volume of the connecting device is set too low.
The connecting device is not set to send Bluetooth audio signals to
the unit.
The Bluetooth connection of the unit with the device has
terminated.
There is a device (microwave oven, wireless LAN, etc.) that outputs
signals in the 2.4 GHz frequency band nearby.
This unit and the connecting device are too far apart.
Remedy
Terminate current Bluetooth connection, and perform pairing with the new device.
Move the device closer to this unit.
Move this unit away from the device that is emitting radio-frequency signals.
Perform pairing with a device which supports A2DP.
Terminate current Bluetooth connection, then establish a Bluetooth connection
with that device again.
Turn on the Bluetooth function of the device.
Delete the pairing information of the device, and then perform pairing again
(p.42).
This unit can be paired with eight devices. If pairing with a ninth device is
performed, the pairing information with the earliest connection date will be
deleted.
Turn up the volume of the connecting device.
Switch the output of Bluetooth audio signals of the connecting device to the unit.
Perform Bluetooth connection operations again (p.43).
Move this unit away from the device that is emitting radio-frequency signals.
Move the connecting device closer to this unit.
74
En