Multitech MultiVOIP MVP210-SS User Manual page 117

MultiVOIP User Guide
Voice/Fax Parameter Definitions (cont'd)
Field Name
FAX Parameters
(cont'd)
Fax Volume
(
Default =
)
-9.5 dB
Jitter Value
(Fax)
Mode (Fax)
Technical Configuration
Valuee Description
-18.5 dB Controls output level of fax tones. To
to –3.5 dB be changed only under the direction of
Multi-Tech's Technical Support.
Default =
Defines the inter-arrival packet
400 ms
deviation (in milliseconds) for the fax
transmission. A higher value will
increase the delay, allowing a higher
percentage of packets to be
reassembled. A lower value will
decrease the delay allowing fewer
packets to be reassembled.
FRF 11;
FRF11
is frame-relay FAX standard using
T.38
these coders: G.711, G.728, G.729, G.723.1.
(T.38 not
T.38 is an ITU-T standard for storing
currently
and forwarding FAXes via email using
sup-
X.25 packets. It uses T.30 fax standards
ported)
and includes special provisions to
preclude FAX timeouts during IP
transmissions.
117