Philips BDL4651VH/00 Service Manual page 6

6 BDL4651VH LCD
CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD)
USING COMPONENT VIDEO INPUT
1. Connect the green-colored (labeled as "Y") jack of the device to the
green-colored "Y" jack of the display.
2. Connect the blue-colored (labeled as "Pb") jack of the device to the
blue-colored "Pb" jack of the display.
3. Connect the red-colored (labeled as "Pr") jack of the device to the
red-colored "Pr" jack of the display.
4. Connect the red (R) and white (L) audio jacks of the device to the
AUDIO IN (AUDIO2 or AUDIO3) jacks of the display.
USING S-VIDEO INPUT
1. Connect the S-Video connector of the external device to the S-VIDEO
input of the display.
2. Connect the red (R) and white (L) audio jacks of the device to the
AUDIO IN (AUDIO2 or AUDIO3) jacks of the display.
USING VIDEO INPUT
1. Connect the Video connector of the external device to the VIDEO IN
input of the monitor. Use the supplied BNC-to- RCA adapter if
necessary.
2. Connect the red (R) and white (L) audio jacks of the device to the
AUDIO IN (AUDIO2 or AUDIO3) jacks of the monitor.
Installation
USING HDMI INPUT
Connect the HDMI connector of the external device to the HDMI input of
the monitor.
CONNECTING A PC
USING VGA INPUT
1. Connect the 15-pin VGA connector of the PC to the VGA IN connector
of the monitor.
2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the
monitor.
USING DVI INPUT
1. Connect the DVI-D connector of the PC to the DVI-D connector of the
monitor.
2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the
monitor.