Ddc Instructions - Philips BDL4651VH/00 Service Manual

BDL4651VH LCD 25

DDC Instructions

DDC Data Re-programming
In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect,
the serial numbers have to be re-programmed "Analog DDC IC, Digital DDC IC & EEPROM".
It is advised to re-soldered DDC IC and main EEPROM from the old board onto the new board if circuit board have
been replaced, in this case the DDC data does not need to be re-programmed.
Additional information
Additional information about DDC (Display Data Channel) may be obtained from Video
Electronics Standards Association (VESA).
Extended Display Identification Data(EDID) information may be also obtained from
VESA.
Configuration and procedure
1.Install "CustomerTool_V1.2＂ in PC or NB
2. Press "Y＂ to install DriverLINX Port I/O Driver