7.14 Label
•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
7.15 Product Dimension / Weight
•
Unit dimension (without stand) -
•
Packed unit dimension (carton) -
•
Net weight (with stand) -
•
Gross weight -
7.16 Transportation
Packaging and wrapping shall be sufficient to protect the product against damage or loss
during shipment from the supplier to the destination specified in the purchase order. All
packaging materials are subject to test and evaluation per XTN-0009,UAN-D636.
Packaging unit should be protected by corner protector on 4 corners, don't use surrounding
cardboard.
7.16.1 Transportation packages
The overall test sequence is: vibration test, drop test and when applicable cold drop test.
The sequential tests have to be carried out using the same packaging.
Vibration, drop test should be performed at ambient temperature (20°C to 23
relative humidity (40% to 65%).
7.16.2 Transportation test procedures
Transportation test specification refers to XTN-0009.pdf, for all regions.
Packaging test
•
Vibration and drop or cant-drop test (UAN-D 1534/01)
•
Vibration and cold/drop test (UAN-D 1534/01, UAN-D 1534/02 and UAN-D 636)
•
Vibration, bump and drop test only for China & India(UAN-D 1534/02)
•
Multiple drop test only for China & India(UAN-D 1534/02)
•
Bump test only for China & India(UAN-D 1534/02)
Un-packaging test
•
Fragility test optionally (UAN-D 1534/01)
•
Drop onto a face (IEC 60068-2-31 test Ec)
•
Vibration test (IEC 60068-2-6 test Fc)
•
Vibration test, screen size < 56cm, only for China & India (GB 9384 / 97)
General Product Specification
1060(W)*660(H)*405(T)mm
1190 (Length)* 290(Width)* 754 ( Height)
33.5KG
27.5
BDL4651VH LCD
101
o
C) and