Installation - Philips BDL4651VH/00 Service Manual

4 BDL4651VH LCD
FRONT VIEW
1. Remote control sensor, ambient light sensor and power
indicator
• Receives command signals from the remote control.
• Detects the ambient lighting conditions around the display.
• Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks green when remote control signal is received
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned off
REAR VIEW
1. ENTER/VIDEO SOURCE button
• Use this button to select the input source.
• When the On Screen Display menu is active, this is also
used as the SET button.
2. MENU button
• Use this button to engage the On Screen Display menu.
• When the On Screen Display menu is active, use this button
to return to the previous menu.
 
3. button
• When the On Screen Display menu is active, use these as
the UP/DOWN menu buttons.

• Press and hold the
seconds to lock or unlock all buttons.
 
4. button
• When the On Screen Display menu is active, use these as
the PLUS/MINUS menu buttons.
5. POWER button
Use this button to turn the display on or into standby mode.
6. Power indicator
Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks red when the display enters DPMS mode

and buttons simultaneously for 3

Installation

- off when the main power of the display is turned off
7. Smart Insert installation holes
Location for the Smart Insert (for integration of a small form factor PC)
and M4 screws. (Maximum load: 2kg)
8. Cable retainer installation holes
Install the cable retainer using these holes.
9. Carrying handle
Use these handles when lifting or moving your display.
INPUT/OUTPUT TERMINALS
1. Main power switch Press to switch the main power on/off.
2. AC IN (8.0 A) Connects the supplied power cord to the wall outlet
3. AC OUT (4.0 A)
Connects to the AC IN socket of another BDL4651VH unit or an external
media device
4. AUDIO IN (AUDIO1) Connects to the audio output of a computer
5. AUDIO OUT R/L
Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3)
or HDMI jack
6. SPEAKERS R/L
Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3)
or HDMI jack to external speakers
7. AUDIO IN (AUDIO2/AUDIO3)
Connects to the audio output of an AV device
8. VIDEO IN (HDMI)
Connects to the HDMI output of an AV device or to theDVI-D output of a PC
(Using a DVI-HDMI cable)
9. VIDEO IN (DVI-D)
Connects to the DVI-D output of a PC or to the HDMIoutput of an AV
device (Using a DVI-HDMI cable)
10. VGA OUT Outputs the VGA signal from the VGA IN jack
11. VGA IN Connects to the VGA output of a computer
12. RS-232C (OUT/IN)
RS232C network connection input/output for the use of loop through
function
13. VIDEO IN (COMPONENT)
Component video input (YPbPr) for connecting to the component output
of an AV device
14. VIDEO IN (S-VIDEO)
S-Video input for connecting to the S-Video output of an AV device
15. VIDEO OUT
Connects to the video input of an AV device or another BDL4651VH unit
16. VIDEO IN
Connects to the video output of an AV device or another BDL4651VH
unit